Experimental Investigation on the Drag Reduction for an Axi-symmetric Body by Micro-bubble and Polymer Solution

  • Published : 2004.03.01

Abstract

Experiments on friction drag reduction by injecting polymer (Polyethylene oxide) solution or micro-bubbles were carried out in the cavitation tunnel of KRISO. Two different drag reduction mechanisms were applied to a slender axi-symmetric body to measure the total drag reduction. And then the amount of friction drag reduction was estimated under the assumption that the reduction mechanisms were effective only to the friction drag component. As the result of the tests, polymer solution drag reduction up to 23% of the total drag was observed and it corresponds to about 35% of the estimated friction drag of the axi-symmetric body. This result matched reasonably well to that of the flat plate test "(Kim et al, 2003)". The normalization of the controlling parameters was tried at the end of this paper. Micro-bubble drag reduction was within 1% of its total drag. This unexpected result was quite different from that of the flat plate case "(Kim et at, 2003)" The possible reasons were discussed in this paper.

Keywords

References

  1. ITTC, Proceedings of the 8th ITTC, Madrid, Spain, published by Canal de Experiencias Hidrodinamicas, El Pardo, Madrid, 1957
  2. Jang, J.H. and H. Kim. 1999. On the Reduction of a Ship Resistance by Attaching an Air Cavity to Its Flat Bottom. J. of Society of Naval Architects of Korea, 36, 2,1-8
  3. Kim, D.S, H.T. Kim and W.J. Kim. 2003. Experimental Results of Friction-Drag Reduction by Injection of Microbubbles. Proc. of the Annual Spring Meeting of Society of Naval Architecture of Korea, Chochiwon, Korea
  4. Kim, D.S., W.J. Kim and H.T. Kim. 2002. Experimental Study of Friction Drag Reduction in Turbulent Flow with Polymer and Microbubble Injection. Proc. of the 2nd National Congress on Fluids Engineering, 483-486
  5. Kim, H.T., D.S. Kim and W.J. Kim. 2003. Experimental Results of Friction-Drag Reduction by Injection of PEO Solution: Report (I). Proc. of the Annual Spring Meeting of Society of Naval Architecture of Korea, Chochiwon, Korea
  6. Kodama, Y., A. Kakugawa, T. Takahashi, S. Nagaya and K. Sugiyama. 2002. Microbubbles: Drag Reduction Mechanism and Applicability to Ships. 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan
  7. Proceedings of the International Symposium on Seawater Drag Reduction, Newport, Rhode Island, 1998
  8. Proceedings of the 3rd Symposium on Smart Control of Turbulence, 2002 and also proceedings of the 1st and the 2nd Symposia, 1999 and 2001