초록
본 논문에서는 group delay가 위성 통신 시스템에 미치는 영향을 분석한다. 일정한 상수가 아닌 group delay에서는 신호의 위상 왜곡이 발생한다. Group delay는 특성에 따라 linear, parabolic, cubic으로 모델링할 수 있다. 각각의 group delay 특성을 위성통신 시스템에 적용하여 BER(bit error rate)을 분석한다. Group delay는 신호의 대역폭이 커질수록 신호에 미치는 영향이 커지는 특성을 갖고 있으며, 위성 통신 시스템의 정보 전송속도가 1Mbps, 4Mbps, 8Mbps 의 세 가지인 경우에 대하여 BER을 분석한다. 이때 channel coding으로는 구속장이 7이고, code rate 1/2인 convolution coding과 7/8 punctured convolution coding 를 이용한다. BER = $10^{-5}$을 만족하는 요구 SNR을 관찰하였을 때, group delay의 영향을 받는 데이터는 group delay의 영향을 받지 않은 데이터에 비해 요구 SNR은 최소 0.3㏈에서 최대 4.4㏈으로 증가한다. 이들 중 group delay에 의한 영향이 가장 큰 경우는 group delay의 특성이 linear 특성이고 channel coding이 7/8 puncture convolution coding, 전송속도가 8 Mbps인 경우로서 이때 요구 SNR은 4.4㏈증가한다.
This paper addresses the effect of group delay in satellite communication system. Phase of signal is distorted by the non-constant group delay. Group delay can be modeled as linear, parabolic and cubic type according to the polynomial characteristic. We investigate BER performance of satellite communication system with each 3 kinds of group delay. As signal bandwidth becomes wider, group delay makes more influence on the signal. BNR performance of satellite communication system is found when data rates are 1Mbps, 4Mbps and 8Mbps. Convolution coding with the code rate of 1/2 or 7/8 is used. At BER =10$\^$-5/, system with group delay needs more SNR of minimum 0.3㏈ to maximum 4.4㏈ than system without group delay. The worst case of BER performance happens in the linear group delay, 7/8 punctured convolution coding and 8 Mbps. The required SNR is increased by 4.4㏈ at this worst case.