A Square Coaxial Transmission Line with a Thin-Wire Inner Conductor to Measure the Absorbing Performance of Electromagnetic Absorbers

  • Kang, Tae-Weon (Electromagnetics Group, Korea Research Institute of Standards and Science) ;
  • John Paul (Electromagnetics Research Group, School of Electrical and Electronic Eng.,University of Nottingham) ;
  • John Paul
  • Published : 2004.03.01

Abstract

A low-frequency coaxial reflectometer(LCR) with a thin-wire inner conductor is designed and constructed to measure nondestructively the absorbing performance of electromagnetic absorbers in the frequency range of 10 MHz to 200 MHz. The LCR consists of a square coaxial transmission line and a network analyzer with a time-domain measurement capability. Inherent characteristics of a square coaxial line with a thin-wire inner conductor which deteriorate the impedance matching of the input port of the LCR are addressed. And the characteristics are improved by employing a multiwire inner conductor. Measured and calculated reflection losses of a flat ferrite tile absorber are presented.

Keywords

References

  1. Electronics and Communications in Japan v.77 no.10 Characteristics of grid ferrite electromagnetic absorber Y.Naito;H.Anzai;T.Mizumoto https://doi.org/10.1002/ecja.4410771010
  2. Electronics and Communications in Japan v.78 no.2 Design of super wideband electromagnetic absorber and its characteristics Y.Naito;H.Anzai;T.Mizumoto
  3. J. Korea Electromagn. Eng. Soc. v.2 no.1 A study on broadband design of EM wave absorber for anechoic chamber D.I.Kim;J.Y.Son;Y.S.Weon;D.W.Ku;K.M.Kim;J.M.Song;B.D.Yea
  4. ANSI/IEEE C63.4 Methods of Measurement of Radio-Noise Emissions from Low-voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz American National Standards Institute
  5. IEC 61000-4-3 Electromagnetic Compatibility(EMC), Part 4: Testing and Measurement Techniques- Section 3: Radiated, Radio-frequency, Electromagnetic Field Immunity Test International Electrotechnical Commission
  6. IEEE Std 1128-1998 IEEE Recommended Practice for Radio-Frequency(RF) Absorber Evaluation in the Range of 30 MHz to 5 GHz IEEE Electromagnetic Compatibility Society
  7. IEEE Trans. Antennas Propagat. v.36 Electromagnetic scattering by pyramidal and wedge absorber B.T.Dewitt;W.D.Burnside https://doi.org/10.1109/8.7202
  8. Proc. 9th Intl. Zurich Symp. EMC Electromagnetic wave absorber measurement in a large coax H.F.Pues
  9. Proc. 8th Intl. Zurich Symp. EMC Electromagnetic absorber measurement in a large waveguide H.F.Pues
  10. IEEE Intl. Symp. EMC New measurement method of RF absorber characteristics by large square coaxial line S.Takeya;K.Shimada
  11. Antenna Engineering Handbook H.Jasik
  12. Ph.D. dissertation, Department of Electronics Engineering, Chungnam National University Design of Broadband Electromagnetic Absorbers using the Ferrite/Ferrite Hybrid Structure Yeon-Choon Chung
  13. IEE. Proc. Microw. Antennas Propag. v.141 no.5 Novel method of calculating the characteristic impedance of a coaxial transmission line of arbitrary ceoss-section X.Zhou https://doi.org/10.1049/ip-map:19941260
  14. IRE Trans. Microwave Theory Tech. v.MTT-8 Determination of the capacitance, inductance, and characteristic impedance of rectangular lines T.S.Chen