전력산업 구조개편에 대비한 적정 TRM 및 ATC 결정에 관한 연구

A Study of TRM and ATC Determination for Electricity Market Restructuring

  • 발행 : 2004.03.01

초록

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

키워드

참고문헌

  1. North American Electric Reliability Council (NERC), 'Available Transfer Capability - Definitions and Determinations', NERC Report, June 1996
  2. H. H. Yan, 'PTDF and TLR from a Power Marketer's perspective', Power Engineering Society Summer Meeting, IEEE, Vol. 1, pp. 156-161. 1999 https://doi.org/10.1109/PESS.1999.784339
  3. P. W. Sauer, S. Grijalva, 'Reactive Power Considerations in ATC Computation', Systems Sciences, 1999. HICSS-32. Proceedings of 32nd Annual Hawaii International Conference on, pp. 2047-2054, Nov/Dec. 1979
  4. P. W. Sauer, 'Technical Challenges of Computing Available Transfer Capability (ATC) in Electric Power Systems', Proceedings, 30th Annual Hawaii International Conference on System Sciences, Jan. 1997 https://doi.org/10.1109/HICSS.1997.663220
  5. G. C. Ejebe, J. Tong, J. G. Waight, J. G. Frame, X. Wang, W. F. Tinney, 'Available Transfer Capability Calculations', IEEE Trans. on Power System, Vol. 13, No.4, Nov. 1998 https://doi.org/10.1109/59.736300
  6. IEEE Committee Report, 'IEEE reliability test system', IEEE Trans. Power Apparatus and Systems, Vol. PAS-98, pp. 2047-2054, Nov/Dec, 1979 https://doi.org/10.1109/TPAS.1979.319398
  7. North American Electric Reliability Council (NERC), 'Transmission Capability Margin and Their Use in ATC Determination' ,NERC White Paper, 1999
  8. G. C. Ejebe, J G. Waight, Manuel Santos-Nieto, W. F. Tinney, 'Fast Calculation of Linear Available Transfer Capability', IEEE Trans. on Power Systems, Vol. 15, No.3, pp. 1112-1116, 2000 https://doi.org/10.1109/59.871741
  9. G. Hamound 'Assessment of Available Transfer Capability of Transmission Systems' ,IEEE Trans. on Power Systems, Vol. 15, No.1, Feb. 2000 https://doi.org/10.1109/59.852097
  10. R. Billinton, Wenyuan Li, Reliability Assessment of Electric Power Systems using Monte Carlo Methods, Plenum, New York, 1994