A Micro Shunt Valve with Anti-siphon Effect

  • Lee, Sang-Wook (Underwater Technology Research Center, Institute of Industrial Science, The University of Tokyo) ;
  • Yoon, Hyeun-Joong (Division of Electrical and Computer Engineering, Ajou University) ;
  • Yang, Sang-Sik (Division of Electrical and Computer Engineering, Ajou University)
  • Published : 2004.02.01

Abstract

This paper presents the fabrication and testing of a two-way pressure regulation micro shunt valve with an anti-siphon effect that can be implanted in hydrocephalus patients. This micro shunt valve consists of a silicone rubber membrane and a valve seat for the opening pressure control as well as the anti-siphon behavior. The two-way pressure regulation and the anti-siphon effect of the micro shunt valve are verified experimentally for various sizes of membranes and valve seats.

Keywords

References

  1. Kent M and Van De G, Human Anatomy: Wm. C. Brown Publishers, Dubuque, Iowa, 1984
  2. Drake JM and Saint Rose, The Shunt Book: New York Blackwell Scientific, 1995
  3. Myung Sik Yang, Sang Wook Lee and Sang Sik Yang, 'Fabrication of an Electromagnetic Micropump for Cerebrospinal Fluid Shunt', Trans. KIEE, Vol. 51C, No. 12, pp.591-596, Dec. 2002
  4. Sang Wook Lee, Myung Sik Kim, Hyeun Joong Yoon and Sang Sik Yang, 'An Implantable Micro Check-Valve with a Pre-stressed Membrane', KIEE Fall Conference, Yonsei University, Seoul, Korea, pp.56-58, Nov. 2001
  5. Xing Yang, Charles Grosjean and Yu-Chong Tai, 'Design, fabrication, testing of micromachined silicone rubber membrane valves', Journal of Microelectromechanical systems, Vol. 8, No.4, pp. 393-402, Dec. 1999 https://doi.org/10.1109/84.809053
  6. Woo Young Sim, Sang Woo Lee and Sang Sik Yang, 'The Fabrication and Test of a Phase-change Type Micropump', Trans. KIEE, Vol. 49C, No.6, pp.360-366, Jun. 2000
  7. Tae Gyu Park, Sang Sik Yang, Myung Sik Kim and Sang Woo Lee 'Fabrication of a Micro Scent Injector', Trans. KIEE, Vol. 50C, No. 12, pp.633-638, Dec. 2001
  8. Marc Madou, Fundamentals of Microfabrication: CRS Press LLC, pp. 169, 1997