References
- Chang, M. J., Shyu, R. J. and Fang, L. J., 1987, 'An Experimental Study of Heat Transfer from Surface Mounted Components to a Channel Airflow,' ASME Paper No. 97-HT-75
- Roeller, P. T., Stevens, J., and Webb, B. W., 1991, 'Heat Transfer and Turbulent Flow Characteristics of Isolated Three-Dimensional Protrusions in Channels,' ASME J. of Heat Transfer, Vol. 113, pp. 597-603 https://doi.org/10.1115/1.2910607
- Rosten, H. I., and Viswanath, R., 1994, 'Thermal Modeling of the Pentium TM Processor Package,' IEEE Electronic Component Technology Conf., Washington, D.C., pp. 421-428
- Behnia, M., Nakayama, W. and Wang, J., 1998, 'CFD Simulation of Heat Transfer from a Heated Module in an Air Streams Comporison with Experiments and a Parametric Study,' InterSociety Conf. on Thermal Phenomena, pp. 43-151 https://doi.org/10.1109/ITHERM.1998.689532
- Nakamura, H., Igarashi, T. and Tsutsui, T., 2001, 'Local Heat Transfer Around Wall-Mounted Cube in the Turbulent Boundary Layer,' Int. J. of Heat and Mass Transfer, Vol. 44, pp. 3385-3395 https://doi.org/10.1016/S0017-9310(01)00009-6
- Park, S. H. and Shin, D. J., 2002, 'A Study on the Heat Transfer Characteristics Around a Surface-Mounted Air-Cooled Module for the Flow Angle-of-Attack,' Trans. of the KSME, B, Vol. 26, No. 9, pp. 1267-1275 https://doi.org/10.3795/KSME-B.2002.26.9.1267
- Graham, K. and Witzman, S., 1988, 'Analytical Correlation of Thermal Design of Electronic Packages,' Cooling Technology for Electronic Equipment, pp. 249-264
- Nakayama, W. and Park, S. H., 1996, 'Conjugate Heat Transfer from a Single Surface-Mounted Block to Forced Convective Air Flow in a Channel,' ASME J. of Heat Transfer, Vol. 118, pp. 301-309 https://doi.org/10.1115/1.2825845
- Lee, J. H., Park, S. H., Riu, K. J. and Bang, C. H., 2000, 'Mixed Convection Transport from a Module on the Bottom Surface of Three Dimensional Channel,' Trans. of the KSME, B, Vol. 24-15, pp. 632-639
- Park, S. H. and Hong, T., 2002, 'Ehancement of Heat Transfer from an Air-Cooled 3-Dimen-sional Module by Means of Heat Spreading in the Board,' Trans. of the KSME, B, Vol. 26, No. 7, pp. 1022-1030
- Zhang, X., Imamura, T. and Fujii M., 1999, 'Conjugate Heat Transfer from Small Heat Source Mounted on a Conductive Wall,' ASME Advances in Electronic Packaging, EEP-Vol. 26-1, pp. 511-519
- Kobayashi, T., Ogushi, T., Sumi, N. and Fujii, M., 1998, 'Thermal Design of a Ultra-Slim Notebook Computer,' in InterSociety Conference on Thermal Phenomena, pp. 15-21 https://doi.org/10.1109/ITHERM.1998.689513
- Hisano, K., Iwasaki, H. and Ishizuka, M., 1996, 'Thermal Analysis of Compact Electronic Equip-ment,' in Proceedings of the 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Vol. 2
- Viswanath, R. and Ali, I. A., 1997, 'Thermal Modeling of High Performance Package in Portable Computers,' in IEEE Trans. on Componets, Packaging and Manufacturing Technology. Part A, Vol. 20, No. 2 https://doi.org/10.1109/95.588579
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mechamical Engineering, Jan, pp. 3-8