References
- Kim, H. Y. and Kim, J, J., 1994, 'Prediction of Springback and Formability in in 3-D Stamping by an Explicit Code,' J. of the KSTP, Vol. 3, No. 1, pp. 84-96
- Jung, D. W., 1998, 'The Dynamic Explicit Analysis of Auto-body Panel Stamping Process and Investigating Parameter Affects of Dynamic Analysis,' Trans. of the KSME (A), Vol. 22, No. 2, pp. 380-390
- Joo, S. J and Choi, H. S., 1998, 'Hemming Simulation of Automotive Door Inner and Outer,' Proc. of MARC User's Forum, pp. 148-153
- Kim, K. H., Han, K. H. and Kwon, T. H., 1999, 'Elastic Springback in Hemming Process,' Proc. of 5th HANPAM, Hankook ESI, pp. 399-404
- Ahn, D. C, Lee, K. D., Yin, J. J. and Kim, K. H., 2000, 'A Study on the Design of Hemming Process for Automotive Body Panels,' KSTP Trans. of Materials Processing., Vol. 9, No. 6, pp. 624-630
- Svensson, M. and Mattiasson, K., 2000, 'Simulation of Hemming of Automotive Body Components with the Explicit FE-Method,' Proc. of ECCOMAS 2000, Barcelona, Spain
- Svensson, M. and Mattiasson, K., 2000, 'Simulation of Hemming with Different Element Formulations and Time Integration Methods,' Proc. of NUMFORM 2001
- Svensson, M. and Mattiasson, K., 2002, 'The Influence of Anisotropy on the Roll-in in Hemming, A Comparison between FE- Simulation and Practical Tests,' Proc. of NUMISHEET 2002, pp. 261-266
- Muderrisoglu, A., Murata, M, Ahmetoglu, M. A., Kinzel, G. L. and Altan, T., 1996, 'Bending, Flanging, and Hemming of Aluminium Sheet - An Experimental Study,' J. of Materials Processing Technology, Vol. 59, pp. 10-17 https://doi.org/10.1016/0924-0136(96)02281-9
- Livatyali, H., Mtlderrisoglu, A., Ahmetoglu, M. A., Akgerman, N., Kinzel, G. L. and Altan, T., 2000, 'Improvement of Hem Quality by Optimizing Flanging and Pre-hemming Operations Using Computer Aided Die Design,' J. of Materials Processing Technology, Vol. 98, pp. 41-52 https://doi.org/10.1016/S0924-0136(99)00304-0
- HKS Inc., 2002, ABAQUS User's Manual, Ver. 6.3.
- Zienkiewicz, O. C. and Zhu, J. Z., 1987, 'A Simple Error Estimator and Adaptive Procedure for Practical Engineering Analysis,' Int. J. of Numerical Methods for Engineering, Vol.24, pp. 337-357 https://doi.org/10.1002/nme.1620240206
- Kim, H. J. and Kim, N., 1995, 'Remeshing Criterion for Large Deformation Finite Element Analysis Based on the Error Calculation,' KSTP Trans, of Materials Processing, Vol. 4, No. 1, pp. 92-104
Cited by
- A Study on Improvement of Bending Quality of Hemmed Plates in Sheet Metal Forming vol.29, pp.12, 2012, https://doi.org/10.7736/KSPE.2012.29.12.1360
- Numerical Evaluation of Hemming Defects Found on Automotive Door Panels vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.280