한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권2호
  • /
  • Pages.21-26
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

총형공구를 이용한 베어링 Rubber Seal 금형가공에 관한 연구

A Study on Die of Bearing Rubber Seal by Formed Tool

  • 노상흡 (전북대학교 자동차 부품·금형 기술혁신센타) ;
  • 이희관 (전북대학교 자동차 부품·금형 기술혁신센타) ;
  • 김연술 (전북대학교 대학원) ;
  • 김도형 (전북대학교 대학원) ;
  • 양균의 (전북대학교 기계항공시스템공학부)
  • 발행 : 2004.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The formed tool is used to machine the geometrical shape of bearing rubber seal efficiently. The bearing rubber seal has complex geometry for the complicated geometrical shape to prevent leakage of lubricant oil and influx of the dust effectively. Because it is difficult to machine the unique shape exactly by the conventional tool, the formed tool is used in machining a rubber seal die. In this paper, It is performed to investigate machining characteristic of the formed tool； cutting edge wear, cutting force, and surface quality. Also, an efficient precision machining condition is proposed, and the inspection results of rubber seal with CAI are discussed.

키워드

참고문헌

  1. Kim, C. K., Jeon,I. K., Shim, W. J., Kim, C. E., 'A Study on the Contact Force and Temperature Distribution of Lip Seals,' J. of KSME, Vol. 18, No. 6, pp. 1559-1566
  2. Lee, K. W., Noh, S. D., Sheen, D. M. and Hahn, H. S., 'NC Code Post-Processor Considering Metal Removal Rate,' J. of KSPE, Vol. 17, No. 5, pp. 116-123
  3. Kim, H. C., Lee, H. K., Huang, J. C., Kong, Y. S. and Yang, G. E., 'A Study on Machining Electrode for LED Mold with Shaped End-Mill,' J. of KSPE, Vol. 19, No. 10, pp. 187-194, 2002
  4. Kang, M. C., Kim, J. S., Lee, D. W., Kim, K. H. and Ha, D. G., 'Machinability Evaluation according to Variation Endmill Shape for High Speed Machining,' J. of KSPE, Vol. 19, No. 5, pp. 133-138
  5. Kim, J. S., Lee, D. W., Jeong, Y. H., Kang, M. C., Lee, K. Y., Kim, K. G. and Kim, S. W., 'Advanced Machining Technology for Die Manufacturing,' J. KSPE, Vol. 17, No. 4, pp. 48-68, 2000
  6. Ko, T. J., Jeong, H. and Kim, H. S., 'Selection of Machining Inclination Angle of Tool Considering Tool Wear in High Speed Ball End Milling,' J. of KSPE, Vol. 15, No. 9, pp. 135-144
  7. 서남섭, '기계공작법,' 동명사, pp. 622-641, 1998
  8. Kim, J. H. and Kim, H. S., 'A Study on Optimal Design of Face Milling Cutter Geometry(II),' J. of KSME, Vol. 18, No. 9, pp. 2225-2233, 1994
  9. Weber. and Tobias, 'Conoscopic 3D measurement system,' Sensor Review, Vol. 20, No. 3, pp. 202-205, 2000 https://doi.org/10.1108/02602280010372331
  10. Kim, W. S. and Ko, S. L., 'Development of Effective Measurement Method for Burr Geometry,' J. of KSPE, Vol. 2, No. 6, pp. 81-87