References
- Yazdi, N., Ayazi, F. and Najafi, K., 1998, 'Micromachined Inertial Sensors,' Proceedings of the IEEE, Vol. 86, No. 8, pp. 1640-1659 https://doi.org/10.1109/5.704269
- Greiff, P., Boxenhorn, B., King, T. and Howe, R. T., 1991, 'Silicon Monolithic Micromechanical Gyroscope,' Tech. Dig. 6t Int. Conf. Solid-State Sensors and Actuators (Transducers'91), San Francisco, CA, pp. 966-968 https://doi.org/10.1109/SENSOR.1991.149051
- Burdess, J. S., Harris, A. J., Cruickshank, J., Wood, D. and Cooper, G., 1994, 'A Review of Vibrtory Gyroscopes,' Engineering Science and Education Journal, pp. 249-254 https://doi.org/10.1049/esej:19940603
- Oh, Y. S., Lee, B. L., Baek, S. S., Kim, H. S., Kim, J. G., Kang, S. J. and Song, C. M., 'A tunable vibratory microgyroscope,' Sensors and Actuators, Vol. A64, pp. 51-56, 1998 https://doi.org/10.1016/S0924-4247(98)80057-5
-
Kobayashi, S., Hara, T., Oguchi, T., Asaji, Y., Yaji, K. and Ohwada, K., 1999, 'Double-Frame Silicon Gyroscope Packaged Under Low Pressure by Wafer Bonding,' The
$10^{th}$ Int. Conf. On Solid-Stage Sensors and Actuators (Transducer 99), Sendai, Japan, 3D1.3 - Adams, S., Grovess, J., Shaw, K., Davis, T., Cararelli, D., Carroll, R., Walsh, J. and Fontanella, M., 1999, 'A Single-Crystal Silicon Gyroscope with Decoupled Drive and Sense,' Part of the SPIE Conf. On Micromachined Devices and Components V, Santa Clara, California, Vol. 3876, pp. 74-83 https://doi.org/10.1117/12.360511
-
Geiger, W., Butt, W. U.,
$Gai{\beta}er,$ A., Frech, J., Braxmaier, M., Link, T., Kohne, A., Nommensen, P., Sandmaier, H. and Lang, W, 2001, 'Decoupled Microgyros and The Design Principle DAVED,' The 14th IEEE International Conference (MEMS 2001), pp. 170-173 https://doi.org/10.1109/MEMSYS.2001.906507 - Mochida, Y., Tamura, M. and Ohwada, K., 1999, 'A Micromachined Vibrating Rate Gyroscope with Independent Beams for The Drive and Detection Modes,' Twelfth IEEE International Conference (MEMS '99), pp. 618-623 https://doi.org/10.1109/MEMSYS.1999.746899
-
Park, K. Y., Jeong, H. S., An, S. Shin, S. H. and Lee, C. W., 1999, 'Lateral Gyroscope Suspended by Two Gimbals Through High Aspect Ratio ICP Etching,' The
$10^{th}$ Int. Conf. On Solid-Stage Sensors and Actuators (Transducer 99), Sendai, Japan, 3D2.1 - Baek, S. S., Oh, Y. S., Ha, B. J., An, S. D., An, B. H., Song, H. and Song, C. M., 1999, 'A Symmetrical zaxis Gyroscope with A High Aspect Ratio using Simple and New Process,' Twelfth IEEE International Conference (MEMS '99), pp. 612-617 https://doi.org/10.1109/MEMSYS.1999.746898
- Esashi, M. and Minami, K., 1994, 'Packaged Micromechanical Sensors,' Emerging Technologies and Factory Automation, IEEE Symposium (ETFA '94), pp.30-37 https://doi.org/10.1109/ETFA.1994.402027
- Funk, K., Emmerich, H., Schilp, A., Offenberg, M., Neul, R. and Larmer, F., 1999, 'A Surface Micromachined Silicon Gyroscope using A Thick Polysilicon Layer,' Twelfth IEEE International Conference (MEMS '99), pp. 57-60 https://doi.org/10.1109/MEMSYS.1999.746752
- Tanaka, K., Mochida, Y., Sugimoto, S., Moriya, K., Hasegawa, T., Atsuchi, K. and Ohwada, K., 1995, 'A Micromachined Vibrating Gyroscope,' Proceedings of IEEE (MEMS '95), pp. 278-281
- Geen, J.A., Sherman, S.J., Chang, J.F. and Lewis, S.R., 2002, 'Single-chip Surface Micromachined Integrated Gyroscope with 50/spl deg//h Allan Deviation,' IEEE Journal of Solid-State Circuits, Vol. 37, Issue 12, pp. 1860-1866 https://doi.org/10.1109/JSSC.2002.804345
- Hwang, K. H., Lee, K. H., Park, G. J., Lee, B. L., Cho, Y. C. and Lee, S. H., 2002, 'Robust Design of The Vibratory Gyroscope with Unbalanced Inner Torsion Gimbal Using Axiomatic Design,' Journal of KSME, Vol. 26, No.5, pp. 914-923 https://doi.org/10.3795/KSME-A.2002.26.5.914
- Han, J. S. and Kwak, B. M., 2001, 'Robust Optimal Design of A Vibratory Microgyroscope Considering Fabrication Errors,' Journal of Micromechanics and Microengineering, Vol. 11, pp. 662-671 https://doi.org/10.1088/0960-1317/11/6/307
- DOT, Vanderplaats Research and Development Inc.