Abstract
Poisson's ratio due to multiaxial creep of concrete reported by existing experimental works was controversial. Poisson's ratio calculated from measured strain is very sensitive to small experimental error. This sensitivity make it difficult to find out whether the Poisson's ratio varies with time or remain constant, and whether the Poisson's ratio has different value with stress states or not. A new approach method is needed to resolve the discrepancy and obtain reliable results. This paper presents analytical study on multiaxial creep test results. Microplane model as a new approach method is applied to optimally fitting the test data extracted from experimental studies on multiaxial creep of concrete. Double-power law is used as a model to present volumetric and deviatoric creep evolutions on a microplane. Six parameters representing the volumetric and deviatoric compliance functions are determined from regression analysis and the optimum fits accurately describe the test data. Poisson's ratio is calculated from the optimum fits and its value varies with time. Regression analysis is also performed assuming that Poisson's ratio remains constant with time. Four parameters are determined for this condition, and the error between the optimum fits and the test data is slightly larger than that for six parameter regression results. The constant Poisson's ratio with time is obtained from four parameter analysis results and the constant value can be used in practice without serious error.
기존의 다축응력 상태의 콘크리트 크리프 실험으로부터 제안된 푸아송비에 대한 연구결과는 서로 큰 차이를 나타내고 있다. 측정된 변형률로부터 계산된 푸아송비는 작은 실험 오차에 의해서도 매우 민감하며, 이러한 민감성은 푸아송비의 시간에 따른 변화와 응력상태에 따른 경향을 파악하는 데 있어 큰 어려움을 초래한다. 따라서 이러한 연구결과의 불일치를 해결하고 신뢰성 있는 결과를 도출하기 위해서 새로운 분석방법이 요구된다. 이 연구는 다축응력 상태의 크리프 실험결과에 대한 새로운 분석방법으로 미세평면 모델을 적용하였다. 미세평면 상에서 체적과 편차컴플라이언스에 대한 수학적 모델로는 이중지수 법칙을 사용하였다. 체적과 편차성분의 컴플라이언스는 여섯 개의 변수로 구성되며 실험결과를 최적으로 모사하는 변수를 최적화 기법으로부터 구하였다. 여섯 변수에 대한 회귀분석결과로 부터 계산된 푸아송비는 시간에 따라 변화하였다. 또한 시간에 따라 푸아송비가 일정하다는 조건에서 네 변수를 결정하였으며 이 때의 회귀분석결과와 실험 측정값 사이의 오차는 여섯 변수가 사용된 회귀분석결과의 오차에 비해 다소 크게 나타났다. 네 변수에 대한 회귀분석결과로부터 얻은 시간에 따라 일정한 푸아송비는 큰 오차 없이 실제의 구조해석에 유용하게 사용될 수 있을 것으로 판단된다.