DOI QR코드

DOI QR Code

Phase Transitions of $LiMn_2O_4$ on $CO_2$ Decomposition

($CO_2$ 분해시 $LiMn_2O_4$의 상변화

  • Kwoen, Tae-Hwan (Department of Chemical Engineering, Hong-Ik University) ;
  • Yang, Chun-Mo (Eco-Nono Research Center, Korea Institute of Science and Technology) ;
  • Park, Young-Goo (Department of Environmental Engineering, Samcheok National University) ;
  • Cho, Young-Koo (Department of Chemical Engineering, Samcheok National University) ;
  • Rim, Byung-O (Department of Chemical Engineering, Hong-Ik University)
  • 권태환 (홍익대학교 공과대학 화학공학과) ;
  • 양천모 (한국과학기술연구원 나노환경연구센터) ;
  • 박영구 (삼척대학교 환경공학과) ;
  • 조영구 (삼척대학교 화학공학과) ;
  • 임병오 (홍익대학교 공과대학 화학공학과)
  • Published : 2003.03.31

Abstract

$LiMn_2O_4$ catalyst for $CO_2$ decomposition was synthesized by oxidation method for 30 min at 600$^{\circ}C$ in an electric furnace under air condition using manganese(II) nitrate $(Mn(NO_3)_2{\cdot}6H_2O)$, Lithium nitrate ($LiNO_3$) and Urea $(CO(NH_2)_2)$. The synthesized catalyst was reduced by $H_2$ at various temperatures for 3 hr. The reduction degree of the reduced catalysts were measured using the TGA. And then $CO_2$ decomposition rate was measured using the reduced catalysts. Phase-transitions of the catalysts were observed after $CO_2$ decomposition reaction at an optimal decomposition temperature. As the result of X-ray powder diffraction analysis, the synthesized catalyst was confirmed that the catalyst has the spinel structure, and also confirmed that when it was reduced by $H_2$, the phase of $LiMn_2O_4$ catalyst was transformed into $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase. After $CO_2$ decomposition reaction, it was confirmed that the peak of $LiMn_2O_4$ of spinel phase. The optimal reduction temperature of the catalyst with $H_2$ was confirmed to be 450$^{\circ}C$(maximum weight-increasing ratio 9.47%) in the case of $LiMn_2O_4$ through the TGA analysis. Decomposition rate(%) using the $LiMn_2O_4$ catalyst showed the 67%. The crystal structure of the synthesized $LiMn_2O_4$ observed with a scanning electron microscope(SEM) shows cubic form. After reduction, $LiMn_2O_4$ catalyst became condensed each other to form interface. It was confirmed that after $CO_2$ decomposition, crystal structure of $LiMn_2O_4$ catalyst showed that its particle grew up more than that of reduction. Phase-transition by reduction and $CO_2$ decomposition ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase at the first time of $CO_2$ decomposition appear like the same as the above contents. Phase-transition at $2{\sim}5$ time ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase by reduction and $LiMn_2O_4$ of spinel phase after $CO_2$ decomposition appear like the same as the first time case. The result of the TGA analysis by catalyst reduction ; The first time, weight of reduced catalyst increased by 9.47%, for 2${\sim}$5 times, weight of reduced catalyst increased by average 2.3% But, in any time, there is little difference in the decomposition ratio of $CO_2$. That is to say, at the first time, it showed 67% in $CO_2$ decomposition rate and after 5 times reaction of $CO_2$ decomposition, it showed 67% nearly the same as the first time.

Keywords

References

  1. 박진원, 이승무, '이산화탄소에 의한 지구온난화 대책기술의 연구동향', 공업화학과 기술, 11, 218 (1993)
  2. W. Yang, G. Zhang, J. Xie, L. Yang, and Q. Liu, J. Power Sources, 81-82, 412 (1999) https://doi.org/10.1016/S0378-7753(99)00219-0
  3. S. Bach, M. Henry, N. Baffier, and J. Livage, J Solid State Chemistry, 88, 325 (1990) https://doi.org/10.1016/0022-4596(90)90228-P
  4. K. Akanuma, J. Materials Science, 28, 860 (1993) https://doi.org/10.1007/BF00400865
  5. M. M. Thackeray, M. F. Mansuetto, and J. B. Bates, J. Power Sources, 68, 153 (1996)) https://doi.org/10.1016/S0378-7753(96)02624-9
  6. M. M. Thackeray, M. F. Mansuetto, D. W. Dees, and D. R. Vissers. 'The Thermal Stability of Lithium-Manganese-Oxide Spinel Phases', Materials Research Bulletin, 31, 133 (1996) https://doi.org/10.1016/0025-5408(95)00190-5
  7. M. Tabata, H. Kato, T. Kodama, T. Yoshida, M. Tsusi, and Y. Tamaura, J. Materials Science, 29, 999 (1994) https://doi.org/10.1007/BF00351423
  8. M. Tsuji, Y. Wada, T. Yamamoto, T. Sano, and Y. Tamaura, J. Materials Science, 15, 156 (1996)