References
- M. Noguchi, Y. Kagawa and J. Katagiri, 'Detection of acoustic emissions during hardwood drying'. Mokuzai Cakkaishi, Vol. 26, No.9, pp .637-637, (1980)
- M. Noguchi, S. Okomura and S. Kawamoto, 'Characteristics of acoustic emission during wood drying', Mokuzai Gakkaishi. Vol. 31, No.3, pp. 171-175, (1985)
- C. Skaar, W. Simpson and R. Honeycutt, 'Use of acoustic emissions to identify high levels of stress during oak lumber drying', Forest Products Journal, Vol. 30, No.2, pp. 21-22, (1980)
- R. M. Honeycutt, C. Skaar and W. Simpson, 'Use of acoustic emission to control drying rate of red oak', Forest Products Journal, Vol. 35, No.1, pp. 48-50 (1985)
- S. Ogino, K. Kaino and M. Suzuki, 'Prediction of lumber checking during drying by means of acoustic emission technique', Journal of Acoustic Emission, Vol. 5, No.2, pp. 61-65, (1986)
- S.-H. Lee, S. Quarles and A. Schniewind, 'Wood fracture, acoustic emission, and the drying process. Part 2. Acoustic emission associated with fracture', Wood Science and Technology, Vol. 30, pp. 283-292, (1995)
- M. C. Breese, S. Zhao and G. McLeod, 'The use of acoustic emissions and steaming to reduce checking during the drying of European oak', Holz als Roh und Werkstoff, Vol. 53, No.6, pp. 393-396, (1995) https://doi.org/10.1007/s001070050116
- J. D. Booker, 'Acoustic emission related to instantaneous strain in Tasmanian eucalypt timber during seasoning', Wood Science and Technology, Vol. 28, pp. 249-259, (1992)
- D. Krug, S. Tobisch, R. Emmler and K. Froehlich, 'The use of certain parameters of the acoustic emission analysis for the control of wood drying processes', Holz als Roh und Werkstoff, Vol. 53, No.4, pp. 253-256, (1995) https://doi.org/10.1007/s001070050083
- W. Molinski, J. Raczkowski and S. Ploszko, 'Mechanism of Acoustic Emission in Wood Soaked in Water', Holzforschung, Vol. 45, pp. 13-17, (1991)
- I. Cunderlik, W. Molinski and J. Raczkowski, 'The monitoring of drying cracks in the tension and opposite wood by acoustic emission and scanning electron microscopy method', Holzforschung, Vol. 50, pp. 258-262, (1996)
- J. D. Booker, 'Acoustic emission and surface checking in Eucalyptus regnans boards during drying', Holz Roh-Werkstoff, Vol. 52. No.6, pp. 383-388, (1994) https://doi.org/10.1007/BF02615389
- K. N. Sato, M. Kamei, M. Fushitani and M. Noguchi, 'Discussion of tensile fracture of wood using acoustic emissions. A statistical analysis between the relationships of AE and fracture stress', Mokuzai Cakkaishi, Vol. 30, No.8, pp. 653-659, (1984)
- A. P. Schiewind, 'Concise Encyclopedia of Wood and Wood-based Material Acoustic emission and acousto-ultrasonic characteristics', Pergamon Press, Oxford(1989)
- S.-H. Lee, S. Quarles and A. Schniewind, 'Wood fracture, acoustic emission, and the drying process. Part 2. Acoustic emission associated with fracture', Wood Science and Technology, Vol. 30, pp. 283-292, (1995)
- 김기복, 윤동진, 정중채, 박휘립, 이승석, ‘주성분 회귀분석 및 인공신경망을 이용한 AE 변수와 응력확대계수와의 상관관계 해석’, 비파괴검사학회지, Vol. 21, No.1, pp. 80-90, (2001)
- 김기복, 윤동진, 정중채, 이승석, '주성분 분석과 인공신경망을 이용한 피로균열 열림.닫힘시 음향방출 신호분류' 비파괴검사학회지, Vol. 22, No.5, pp. 532-538, (2002)
- A. Chichibu, T. Kikuchi and T. Kishishita, 'Principal Component Analysis of AE Waveform Parameters for Investigating an Instability of Geotechnical Structures', Journal of Acoustic Emission, Vol. 11. No.4, pp. 547-S56, (1993)
- SAS Institute, SASjSTAT Guide for Personal Computer, Version 6 Edition, SAS Institute, Cary, NC (1987)