DOI QR코드

DOI QR Code

A Study on the Impact Fracture Behavior of Glass Fiber Polyethylene Composites

GF/PE 복합재료의 충격파괴거동에 관한 연구

  • Published : 2003.08.01

Abstract

Many of researches regarding mechanical properties of composite materials are associated with humid environment and temperature. Especially the temperature is a very important factor influencing the design of thermoplastic composites. However, the effect of temperature on impact behavior of reinforced composites have not yet been fully explored. An approach which predicts critical fracture toughness G$_{IC}$ was performed by the impact test in this work. The main goal of this work is to study the effect of temperature and span of specimen supports on the results of Charpy impact test for GF/PE composite. The critical fracture energy and failure mechanism of GF/PE composites were investigated in the temperature range of $60^{\circ}C;to;-50^{\circ}C$ by the Charpy impact test. The critical fracture energy showed the maximum at the ambient temperature, and it tended to decrease as the temperature increased or decreased from the ambient temperature. The major failure mechanisms are the fiber matrix debonding, the fiber pull-out and/or delamination and the matrix deformation.n.

Keywords

References

  1. Yue, C. Y. and Cheung, W. L.(1993) : Some Observations on The Role of Transcrystalline Interohase on the Interfacial Strength of Thermoplastic Composites, J. Mat. Sci. Letters, 12, pp. 1092-1094. https://doi.org/10.1007/BF00420531
  2. Sahnoune, F., Lopez-cuesta, J. M. and Crespy, A.(1999) : Effect of Elastomer Interfa cial Agents on Tensile and Impact Proper pies of $CaCO_3$ Filled HDPE, J. Mat. Sci., 34, pp. 534-544. https://doi.org/10.1023/A:1004542612024
  3. Park. R. and Jang, J.(1999) : Performance Improvement of Carbon fiber / Polyethylen Fiber Hybrid Composites, J. Mat. Sci., 34, pp. 2903-2910. https://doi.org/10.1023/A:1004647721380
  4. Santulli, C. and Cantwell, W. J.(2001) : Impact Damage Characterization on Jute Reinforced Composites, J. Mat. Sci. Letters, 20, pp. 477-479. https://doi.org/10.1023/A:1010945119139
  5. Korinek, Z. and Steidl, J.(2000) : Impact Properties of Short Fiber Reinforced Polyamide after Different Treatments, J. Mat. Sci. Letters, 19, pp. 729-731. https://doi.org/10.1023/A:1006742605629
  6. Schultz, J. M. and Friedrich, K.(1984) : Effect of Temperature and Strain Rate on the Strength of a PET/glass Fibre Composite, J. Mat. Sci., 19, pp. 2246-2258. https://doi.org/10.1007/BF01058102
  7. Pritchard, G. and Yang,(1994) : Microscopy of Damage in Particulate-Filled Glass Epoxy Laminate, J. Mat. Sci., 29, pp. 5047-5053. https://doi.org/10.1007/BF01151095
  8. Matheswaran, M. and Kishore, K.(1995) : Static and Impact Behaviour of Thermoplastic Modified Glass Fabric/epoxy Composites, J. Mat. Sci. Letters, 14, pp.951-954. https://doi.org/10.1007/BF02427474
  9. Tomlinson, W. J. and Holland, J. R.(1994) : Pultrusion and Properties of Unidirectional Glass Fibre-Polypropylene Matrix composites, J. Mat. Sci. Letters, 13, pp. 675-677. https://doi.org/10.1007/BF00271231
  10. 엄윤성.박기호.고성위.김형진(1999) : GF/PP 복합재료의 충격파괴거동에 관한 연구, 한국어업기술 학회지, 35(4), pp.421-427.
  11. Karmaker, A. C.(1997) : Effect of Water Absorption on Dimensional Stability and Impact Energy of Jute Fibre Reinforced Polypropylene, J. Mat. Sci. Letters, 16, pp. 462-464. https://doi.org/10.1023/A:1018508209022
  12. Sjogren, B. A. and Berglund, L. A. (1997) : Failure Mechani는 in Polypropylene with Glass Beads, Polymer Comp., 18(1), pp. 1-8. https://doi.org/10.1002/pc.10255
  13. Baxter, W. J.(1998) : The Correct Interpretation of the Tensile Strength of Short Fibre-Reinforced Composites, J. Mat. Sci. Letters, 33, pp. 5703-5706. https://doi.org/10.1023/A:1004401306975
  14. Schneider, M., Pith, T. and Lambla, M.(1997) : Thoughening of Polystyrene by Natural Rubber-Based Composite Particles, J. Mat. Sci., 32, pp. 6331-6342. https://doi.org/10.1023/A:1018661800111
  15. Karmaker, A. and Prasad, A.(2000) : Effect of Design Parameters on the flexural Properties of Fiber-Reinforced Composites, J. Mat. Sci. Letters, 19, pp. 663-665. https://doi.org/10.1023/A:1006754426314