References
- Reissner, E., 'A Note on the Shear Center Problem for Shear-Deformable Plates,' Int. J. Solids Structures, Vol. 32, No.5, pp. 679-682, 1994 https://doi.org/10.1016/0020-7683(94)00151-L
- Reissner, E., 'The Shear Center Problem for Nonlinear Material Behavior,' Transactions of the ASME, Vol. 62, pp. 822-823, 1995 https://doi.org/10.1115/1.2897024
- Kosmatka, J. B., 'General Behavior and Shear Center Location of Prismatic Anisotropic Beams via Power Series,' Int. J. Solids Structures, Vol. 31, No. 3 pp. 417-439,1994 https://doi.org/10.1016/0020-7683(94)90114-7
- Wondle, R., 'Calculation of the Cross Section Properties and Shear Stress of Composite Rotor Blade,' Vertica, Vol. 6, 1982
- Guyan, R. J., 'Reduction of Stiffness and Mass Matrices,' AIAA Journal, Vol. 3, pp. 380, 1965 https://doi.org/10.2514/3.2874
- Irons, B. M., 'Structural Eigenvalue Problems ; elimination of Unwanted Variables,' AIAA Journal, Vol. 3, pp. 961-962, 1965
- Wright, G. C., Miles, G. A., 'An Economical Method for Determining the Smallest Eigenvalues of Large Linear Systems,' International Journal for Numerical Methods in Engineering, Vol. 3, pp. 25-33 https://doi.org/10.1002/nme.1620030106
- Geradin, M.. 'Error Bounds for Eigenvalue Analysis by Elimination of Variables,' Journal of Sound and Vibration, Vol. 19, pp. 111-132
- Joo, J., 'An Experimental Study on the Dynamic Characteristics of a Hingeless Rotor in Hover,' Ph. D. Dissertation, Dept. of Aerospace Engineering, Seoul National University, 1993
- Oh, Taek-Yul, Choi, Myung-Jin, Yu, Yong-Seok, Chae, Kyung-Duck, 'Determination of the Principal Directions of Composite Helicopter Rotor Blades with Arbitrary Cross Sections,' KSME International Journal, Vol. 14, No.3, pp. 291-297, 2000 https://doi.org/10.1007/BF03186421
- Oh, Taek-Yul, Byun, Chang-Hwan, Yu, Young-Seok, Kwon, Young-Ha, 'A Study on Determination of Shear Center of Beam Having Arbitrary Cross Section,' KSPE Journal, Vol. 19, No. 1, pp. 93-98, 2002
- The MacNeal-Schwendler Corporation, MSC/NASTRAN Dynamics Seminar Notes, The MacNeal-Schwendler Corporation, pp. 4-9 - 4-11, 1992
- Arthur P. Boresi, Richard J. Schmidt, Omar M. Sidebottom, Advanced Mechanics of Materials, John Wiley & Sons, pp. 331-361, 1993