참고문헌
- Bodas, A., Kahraman, A, 2001, 'Influence of Carrier and Gear Manufacturing Errors on the static Planet Load Sharing Behavior of Planetary Gear Sets,' Proc. JSME Int. Conf. on Motion and Power Transmissions, MPT2001-Fukuoka, pp. 633-638
- James, B., Harris, O., 2002, 'Predicting Unequal Planetary Load Sharing Due to Manufacturing Errors and System Deflections, With Validation Against Test Data,' SAE2002-01-0699
-
Hidaka, T., Terauchi, Y., and Nagamura, K., 1979, 'Dynamic Behavior of Planetary Gear (7
$^th$ Report, Influence of the Thickness of the Ring Gear),' Bull. JSME, pp. 1142-1149 https://doi.org/10.1299/jsme1958.22.1142 - Cheon Gill-Jeong, Oh Jae-Kook, 2003, 'Influence of Manufacturing and Assembly Errors on The Static Characteristics of Epicyclic Gear Trains,' Transactions of the KSME, A, Vol. 27, No. 9, pp. 1597-1606 https://doi.org/10.3795/KSME-A.2003.27.9.1597
- Kahraman, A. Vijayakar, S., 2001, 'Effect of Internal Gear Flexibility on the Quasi-Static Behavior of a Planetary Gear Set,' ASME J. of Mechanical Design, Vol. 123, pp. 408-415 https://doi.org/10.1115/1.1371477
- Kahraman, A., 1999, 'Static Load Sharing Characteristics of Transmission Planetary Gear Sets: Model and Experiment,' SAE paper 1999-01-1050
- Oda, S., Miyachika, K., 1987, 'Root Stress of Thin-Rimmed Internal Spur Gear Supported with Pins,' JSME Int. J., Vol. 30, pp. 646-652 https://doi.org/10.1299/jsme1987.30.646
- Kahraman, A, Umrani, M., 2001, 'A Deformable Body Dynamic Analysis of Planetary Gears with Thin Rims,' Proceedings of 2001 India-USA Symposium on Emerging Trends in Vibration and Noise, pp. 1-10
- Vaujany, J. P., Kim, H. C., Guingand, M., Play, D., 1996, 'Effects of Rim and Web on Stresses of Internal Cylindrical Gears,' Proceedings of ASME Int. Gearing Conference, DE-Vol. 88, pp. 73-80
- Kahraman, A., 1994, 'Planetary Gear Train Dynamics,' ASME J. of Mechanical Design, Vol. 116, pp. 713-720 https://doi.org/10.1115/1.2919441
- Lin, J., Parker, R. G., 1999, 'Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration,' ASME J. of Vibration and Acoustics, Vol. 121, pp. 316-321 https://doi.org/10.1115/1.2893982
- Lee Jeong-Han, Ryu Hyoung-Tae and Cheon Gill-Jeong, 1998, 'A Study on the Dynamic Characteristics of an Epicyclic Gear Trains Supported with Journal Bearing,' Transactions of the KSME, A, Vol. 22, No. 1, pp. 198-205
- Vijayakar, S., 1991, 'A Combined Surface Integral and Finite Element Solution for a Three-Dimensional Contact Problem,' Int. J. of Numerical Methods Eng., Vol. 31, pp. 525-545 https://doi.org/10.1002/nme.1620310308
- Parker, R. G., Agashe, V., Vijayakar, S. M., 2000, 'Dynamic Response of a Planetary Gear System using a Finite Element/Contact Mechanics Model,' ASME J. of Mechanical Design, Vol. 122, pp. 304-310 https://doi.org/10.1115/1.1286189
- Parker, R. G., Vijayakar, S. M., Imajo, T., 2000, 'Non-Linear Dynamic Response of a Spur Gear Pair: Modeling and Experimental Comparisons,' J. of Sound and Vibration, Vol. 237(3), pp. 435-455 https://doi.org/10.1006/jsvi.2000.3067
피인용 문헌
- Analysis of Compliance of Planetary Gears based on Floating Intermediate Rings vol.29, pp.6, 2013, https://doi.org/10.9725/kstle.2013.29.6.378
- A Vibration-based Fault Diagnostics Technique for the Planetary Gearbox of Wind Turbines Considering Characteristics of Vibration Modulation vol.39, pp.7, 2015, https://doi.org/10.3795/KSME-A.2015.39.7.665
- Effects of a one-way clutch on the nonlinear dynamic behavior of spur gear pairs under periodic excitation vol.20, pp.7, 2006, https://doi.org/10.1007/BF02915993