References
- Simites, G. J. and Ungbhakom, V., 1975, 'Minimum Weight Design of Stiffened Cylinders under Axial Compression', J. of AIAA, Vol. 13, No. 6, pp. 750-755 https://doi.org/10.2514/3.60432
- Simites, G. J. and Ungbhakom, V., 1975, 'Minimum Weight Design of Stiffened Cylinders under Axial Compression with and without Lateral Pressure', J. of Computers & Structures, Vol. 8, pp. 19-30
- Pappas, M. and Amba-Rao, C. L., 1971, 'A Direct Search Algorithm for Automaterd Optimum Structural Design', J. of AIAA, Vol. 9, pp. 387 - 393 https://doi.org/10.2514/3.6192
- Pappas, M. and Allentuch, A., 1975, 'Pressure Hull Optimization Using General Instability Equation Admitting More Than One Longitudinal Buckling Half-Wave', J. of Research, Vol. 19, pp. 18-22
- Anderson, M. S. and Stroud, W. J., 1979, 'General Panel Sizing Computer Code and Its Application to Composit Structural Panels', J. of AIAA, Vol. 17, pp. 892-897 https://doi.org/10.2514/3.61242
- Zoutendijk, G., 1960, Method of Feasible Direction, Elsevier Publishing Co., Amsterdam
- Vanderplaats, G. N., 1973, CONMIN - A FORTRAN Program for Constrainted Function Minimization, NASA TMX-62-282, Ames Research Center, Moffeff Field, CA
- Agarwal, B. L., and Sobel, L. H., 1977, 'Weight Comparisons of Optimized Stiffened, Unstiffened, and Sandwich Cylindrical Shells', J. of Aircraft, Vol. 14, No. 10, pp. 1000-1008 https://doi.org/10.2514/3.58885
- Dickson, J. N., Biggers, S. B. and Wang, T. S., 1980, 'A Preliminary Design Procedure for Composite Panels with Open-Section Stiffeners Loading in the Post-buckling Range', J. of Composite Material, Vol. 1, pp. 812-825
- Bushnell, D., 1987, 'Theoretical Basis of the PANDA Computer Program for Preliminary Design of Stiffened Panel under Combined In-Plane Loads', J. of Computers and Structures, Vol. 27, No. 4, pp. 541-563 https://doi.org/10.1016/0045-7949(87)90280-X
- Bushnell, D., 1985, Computerized Buckling Analysis of hells, Matinus Nijhoff Publishers, The Netherlands
- Bushnell, D., 1981, 'Buckling of Shells-Pitfall for Designers', J. of AIM, Vol. 19, No.9, pp. 1183-1226
- Qiu, R, 1985, 'Weight Optimization of Stiffened Cylinders under Axial Compression', J. of Computers and Structures, Vol. 21, No.5, pp. 945-952 https://doi.org/10.1016/0045-7949(85)90206-8
- Vanderplaats, G. N. and Sugimoto, H., 1986, 'A General Purpose Optimization Program for Engineering Design', J. of Computers and Structures, Vol. 24, pp. 13-21 https://doi.org/10.1016/0045-7949(86)90331-7
- Won, C. J., Lee, J. S. and Hong, S. J., 1998, 'Optimal Design of Stiffened Laminate Composite Cylindrical Shells', Trans. of KSMTE, Vol. 7, No. 6, pp. 12-18