3축 로드 시뮬레이터 링크부의 메카니즘 설계

A Mechanism Design of the 3-axial Road Simulator Linkage

  • 정상화 (조선대학교 기계공학과) ;
  • 류신호 (조선대학교 대학원 기계공학과) ;
  • 김종태 (조선대학교 대학원 기계공학과) ;
  • 이규태 (조선대학교 기계공학과) ;
  • 장완식 (조선대학교 기계공학과)
  • 발행 : 2003.03.01

초록

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the link unit which is able to realize the 3 element forces such as vertical force, lateral force, and longitudinal force that are applied to the road simulator is designed. Also, the designed link is verified with kinematics and inverse-kinematics. From this results, the designed factor satisfied the maximum stroke so that it satisfied the requirements for 3-axial road simulator.

키워드

참고문헌

  1. J. R. Ellis, Vehicle Handling Dynamics, p.89, MEP, 1994
  2. W. R. Garrott, P. A. Grygier, J. P. Chrstos, K. Salaani, 'Methodology for Validating the National Advanced Driving Simulator's Vehicle Dynamics (NADSdyna),' SAE 970562, 1997
  3. D. H. Weir, S. M. Bourne, 'An Overview of the DRI Driving Simulator,' SAE 950173, 1995
  4. K. Hunt, Kinematic Geometry of Mechanisms, Cambridge University Press, Cambridge, 1978
  5. J. J. Craig, Introduction to Robotics: Mechanics and Control, pp43-50, 2nd Edition, Addison Wesley, New York, 1989
  6. M. Y. Lee, A. G. Erdman, Y. Gutman, 'Applications of KinematicIKinetic Performance Tools in Synthesis of Multi-DOF Mechanisms,' ASME, Vol.116, pp.452-461, 1994 https://doi.org/10.1115/1.2919400
  7. K. D. Yang, J. K. Song, D. S. Bae, C. S. Song, S. H. Cho, S. K. Kim, 'Design and Instrumentation of a Vehicle Driving Simulator,' SAE 950168,1995
  8. J. T. Kim, M. S. Kim, 'A Study on the Design and Characteristics of Kinematics of 6 Degreeof- Freedom Manipulators,' KSME, Vol.21, No.2, pp.467-475, 1996
  9. Y. K. Byun, H. S. Cho, 'Kinematic Analysis of a New Class of 6-DOF Parallel Manipulator,' KSME, Vol.20, No.2, pp.414-430, 1996
  10. M. G. Kim, Dynamic Parameter Identification of Constrained Mechanical System, p.51, KAIST,1986
  11. J. Y. Park, Modeling and Control of a 6-DOF Micro-Positioning Parallel Manipulator, p.83, KAIST,1996
  12. G. H. Kim, A Minimum Interference Design of 6 Axes Link Mechanism for Vehicle Simulator, p.39, Chonnam Univ., 2000
  13. K. D. Zell, 'Overview of Advanced Road Simulation Techniques,' SAE 740946, 1974
  14. G.J. Choi, S. J. Choi, G. H. Rho, Y. M. Yoo, 'A Technical Survey of High Fidelity Driving Simulators,' pp.242-248, KSAE, 1997
  15. S. H. Jeong, Y. R. Park, S. H. Ryu, J. T. Kim, H. U. Kim, A Mechanism Design of the Multi Axial Simulator Link, pp.562-567, KSAE, 2001