초록
최근 차세대 고용량 저장 매체 뿐 아니라 다양한 멀티미디어를 구현할 수 있는 디지털 다기능 디스크(DVD)의 개발에 가전 및 컴퓨터 업계의 노력이 집중되고 있다. 현재 국내에서 제작되고 있는 DVD 구동 모터용 마그네트는 소결 자석 부품을 조립하여 제작하고 있으며 조립에 따른 진동 및 소음 절감에 한계가 있다. 따라서 본 연구에서는 이 회전자를 일체형으로 제작함으로써 조립에 따른 가공 공차를 줄여 진동 및 소음을 줄이고자 한다. 이때 일체형으로 제작하기 위해서는 제품을 자장 중에서 사출해야 되며, 이 사출용 금형을 유한요소법을 이용하여 설계하고 이를 통한 제품의 특성을 실험치와 비교하였다.
Recently. the efforts for the development of DVD concentrate on the high storage and multi-media. DVD has been manufactured by assembling many parts and it causes the vibration and noise. In this paper, one body rotor is proposed, which can make the nose and vibration be decreased. The injection mould for DVD rotor is designed by finite element analysis and the rotor is manufactured in the mould. The magnetic flux density is measured on the surface and it is compared with the design criteria.