링형 초음파모터의 고정자 해석 및 설계

The Stator Analysis and Design of Ring Type Ultrasonic Motor

  • 발행 : 2003.10.01

초록

This paper describes with the stator analysis and design of a ring type ultrasonic motor. The design for piezoelectric ceramic and elastic body of stator were calculated by using the finite element method (FEM) that consider the resonance frequency, vibration mode and coupling efficiency. Namely, such results were acquired the calculation result of the piezoelectric ceramic thickness 0.5[mm], elastic body thickness 2.0[mm], resonance frequency 51.8[kHz], vibration mode 7 order and coupling efficient 12.5[%], the outer and inner diameter of vibrator 50[mm], 38[m]. On the basis of such result, the ring type ultrasonic motor was manufactured. Also for driving characteristics of ring type ultrasonic motor, 2-phase inverter was constructed. Then the propriety of this paper was established from comparision of the simulation and an experiment results of the ring type ultrasonic motor.

키워드

참고문헌

  1. Toshjku Sahida and Takashi Kenjo, 'An Introduction to Ultrasonic Motor', Oxford Science Publications, pp.117-124, 1993
  2. Hiroshi Hirata and Sadayuki Ueha, 'Design of a Traveling Wave Type Ultrasonic Motor', IEEE Trans. Ultrason. Ferro-elect. Freq. Cont., Vol.42, No.2, pp.225-231, 1995 https://doi.org/10.1109/58.365236
  3. S. Ueha, Y. Tomikawa, M. Kurosawa and N. Nakamura, 'Ultrasonic Motors Theory and Application', Clarendon Press Oxford, 1933
  4. Nesbitt W. Hagood Ⅳ and Andrew J. McFarland, 'Modeling of a Piezoelectric Rotary Ultrasonic Motor', IEEE Trans. Ultrason. Ferroelect. Freq. Cont., Vol.42, No.2, pp. 210-224, 1995 https://doi.org/10.1109/58.365235
  5. Reinhard Lerch 'Simulation of Piezoelectric Devicds by Two-and Three-Dimensional finite Elements', IEEE Trans. Ultrason. Ferroelect. Freq. Cont., Vol.37, No.2 pp.233-247, 1990
  6. William T. Thomson, 'Theory of Vibration with Applications', Prentice-Hall, Inc., 1996
  7. 백수현, 박기준, 김승호, 정현규, '로봇 손 구동용 초음파 모터의 설계', 대한전기학회, 하계학술대회 논문집 pp.121-123, 1996