한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권10호
  • /
  • Pages.120-129
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

신발 러핑 경로 측정기 개발

Development of the Roughing Path Measurement System for Footwear

  • 강동배 (부산대학교 지능기계공학과 대학원) ;
  • 김화영 (부산대학교 기계기술연구소) ;
  • 손성민 (부산대학교 지능기계공학과 대학원) ;
  • 안중환 (부산대학교 기계공학부)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For successful establishment of the roughing CAM system based on reverse engineering, it is necessary to develop the measurement method for generation of roughing path from a physical footwear model. In this study, the development of the roughing path measurement system is presented. It consists of 3 CCD cameras, image acquisition board and the roughing path measurement algorithm. The 3 CCD cameras capture images of the sidewall and the bottom of the footwear and, from two images, the outer and inner lines are extracted using image-processing algorithm. The roughing path measurement algorithm generates the roughing path which is reflected on the change of resolution according to the distance between the CCD camera and the measured point. The experimental results show that the developed system can measure the roughing path within the allowable roughing error range.

키워드

참고문헌

  1. Hur, S. M., Choi, J. W. and Lee, S. H., 'Study on Application of Reverse Engineering by Generation of the Free-Form Surface,' Journal of the KSPE, Vol. 18, No. 10, pp. 168-177, 2001
  2. Lee, S. Y. and Lim, S. G., 'Three Dimensional Measurements Using Machine Vision,' Journal of the KSPE, Vol. 18, No.3, pp. 18-22, 2001
  3. Park, H. G .. , Kim, S. W. and Park, J., '3-Dimensional Profile Measurement of Free-Formed Surfaces by Slit Beam Scanning Topography,' Journal of the KSME, Vol. 17, No.5, pp. 1202-1207, 1993
  4. Yang, M. Y. and Yoo, J. K., 'A CAM System of Sculptured Surface Using Computer Vision,' Journal of the KSME, Vol. 14, No.4, pp. 850-856,1990
  5. Kim, S. H., Jang, K. K., Kim, K. P., Huh, H. and Kwon, D. S., 'New CAD Datarization Technique of Shoe Lasts for Automation of the Adaptive Lasting Machine,' Transactions of the Society of CAD/CAM Engineers, Vol. 6, No. 1, pp. 17-23, 2001
  6. Park, Sangkun, Lee, Kunwoo, Kim, Jongwon and Park, Jongwoo, 'A System for Rapid Design and Manufacturing of Custom-Tailored Shoes,' KSME International Journal, Vol. 14, No.6, pp. 675-689, 2000
  7. Choi, J. W., Hur, S. M. and Lee, S. H., 'Free-form Surface Generation from Measuring Points using Laser Scanner,' International Journal of the KSPE, Vol. 3, No.4, pp. 15-23, 2002
  8. Rafael C. Gonzalez and Richard E. Woods, Digital Image Processing, Addison Wesley Publishing Company, 1993
  9. Lee, S. B., Kim, K. D. and Chung, S. C., 'Machined Surface Inspection Based on Surface Fairing on the Machine Tool,' Transactions of the Korean Society of Mechanical Engineers A, Vol. 24, No.4, pp. 937945, 2000
  10. Kang, D. B., Son, S. M., Kim, H. Y. and Ahn, J. H., 'A Study on the Development of the 3-D Scanner for Shoe Roughing,' Proceedings of the KSPE Annual Fall Meeting 2002, pp. 396-399, 2002