한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

초정밀 위치 제어를 위한 이중 서보 메커니즘의 설계 및 제어

Design and Control of Dual Servo Mechanism for High Precision Position Control

  • 최현석 (한양대학교 기계공학부 대학원) ;
  • 송치우 (한양대학교 기계공학부 대학원) ;
  • 한창수 (한양대학교 기계정보경영학부)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Pahk Heui Jae et al, 'Ultra precision positioning systems for servo motor-piezo actuator using the dual servo loop and digital filter implementation,' international Journal of Machine tools & Manufacture, Vol. 41, pp. 51-63, 2001 https://doi.org/10.1016/S0890-6955(00)00061-4
  2. Earle G. Cromer, Jr., 'Mask Aligners and steppers for precision microlithography,' Solid State Technology, pp. 23-27, April 1993
  3. S. Greek and S. Johansson, 'Tensile Testing of Thin Film Microstructures,' Proc. SPIE, Vol. 3224, pp. 344-351, 1997 https://doi.org/10.1117/12.284534
  4. Choi, H. S., Han, C. S., Lee, N. K., Na, K. H., Choi, T. H., 'D-evelopment of micro tensile tester for high functional material,' Trans. KSTP, Vol. 11, No. 7, pp. 561-568, Dec, 2002
  5. W.N. Sharpe Jr., 'An Interferometric Strain/Displacement Measurement System,' NASA Technical Memorandum 101638, August, 1989
  6. H. Ogawa, K. Susuki, S. Kaneko, Y. Nakano, Y. Ishikawa and T. Kitahara, 'Measurement of Mechanical Properties of Microfabricated Thin Film,' Proc. IEEE Micro Electro Mechanical Systems Workshop, pp. 430 - 435, Nagoya, Januaty, 1997 https://doi.org/10.1109/MEMSYS.1997.581882
  7. Higiyaji, Dagasima, 'Measuring and test technology in micro/nano technology,' Machine & Automation, pp. 14 - 22, 2003
  8. Norbert C. Cheung et Al. 'Modeling and control of a High Speed, Long Travel, Dual Voice Coil Actuator,' IEEE Conf. On Power Electronics and Drive Systems, Vol. 1, pp. 270 - 274, 1997 https://doi.org/10.1109/PEDS.1997.618715
  9. Suh, Snag-Min, Chung, Chung Choo and Seung-Hi Lee, ' Discrete-Time LQG/LTR Dual-Stage Controller Disign in Magnetic Disk Drives,' IEEE Trans. On Magnetics, Vol. 37, No. 4, pp. 1891 - 1895,2001 https://doi.org/10.1109/20.951000
  10. Stuart T. smith, 'Flexure, Elements of elastic mechanisms,' Gordon and Breach Science Publishers
  11. Jang, S. M., et al, 'Design and extraction of control parameter of a moving coil type linear actuator for driving linear reciprocating motion control systems,' KIEE, 48B-5-3, pp. 241-248, 1999
  12. S. Schroeck and W.C Messner, 'On Compensator Design for linear time-invariant dual-input/single-output systems.' Proc. American Control Conf., pp. 4122-4126, 1999
  13. Steven J. Schroeck, William C. Messner, ' On Compensator Design for Linear Time-Invariant Dual-Input Single-Output Systems,' IEEE Trans on Mechatronics, Vol. 6, No. 1, pp. 50 - 57, 2001 https://doi.org/10.1109/3516.914391
  14. Katsuhiko Ogata, 'Modern control engineering, 4rd Edition,' Prentice Hall
  15. Park, J. H. et. al., 'Mechanism Design of optical pickup actuator for fast access of optical disk driver,' J of the KSPE, Vol. 19, No. 12, pp. 109-119, Dec, 2002
  16. T. Yi, 'Microscale Material Testing of Single Crystalline Sillicon,' A dissertation for the degree of doctor of philosophy, University of California, LA, 2000
  17. Kim, D. M., et. al, 'Optimal design and control of xyθ fine stage in lithography system,' J of the KSPE, Vol. 19, No. 12, pp. 163-170, Dec, 2002