나노인덴테이션 공정을 이용하여 극미세 패턴을 제작하기 위한 나노변형의 유한요소해석(II)

Finite Element Analysis of Nano Deformation for Hyper-fine Pattern Fabrication by Application of Nanoidentation Process (II)

  • 이정우 (부산대학교 정밀기계공학과) ;
  • 윤성원 (부산대학교 정밀기계공학과) ;
  • 강충길 (부산대학교 기계공학부, 정밀정형 및 금형가공연구소)
  • 발행 : 2003.09.01

초록

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation was studied with numerical method by ABAQUS S/W. Polymer (PMMA) and brittle materials (Si, Pyrex glass) were used as specimens, and forming conditions to reduce the elastic re cover and pile-up were proposed. The indenter was modeled a rigid surface. Minimum mesh sizes of specimens are 1 -l0nm. Comparison between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

키워드

참고문헌

  1. Oliver, W.C., Pharr, G.M., 'An Improved Technique for Determining Hardness and Elastic Modulus using Load and Displacement Sensing Indentation Experiments,' J. Mater. Res., Vol, 7, No, 6, pp.1564-1583, 1992 https://doi.org/10.1557/JMR.1992.1564
  2. Han, J.H., Lee, K.R., Kim, K.S., Lee, S.Y., 'Principal and Applications of Nanoindentation Test,' J. of the KSPE, Vol.19, No.3, pp.19-26, 2002
  3. Ashida, K., Morita, N. and Toshida, Y., 'Study on Nano-Machining Process using Mechanism of a Friction Force Microscope,' JSME International Journal Series C, Vol.44, No.1, pp.51-60, 2001
  4. Hamamaka, H., Ono, T. and Esashi, M., 'Fabrication of Self Supported Si Nano-Structure with STM,' Proc. IEEE MEMS '97, pp.153-156, 1997 https://doi.org/10.1109/MEMSYS.1997.581791
  5. MTS, Nanoindenter XP Manual, 2002
  6. Lee, J.W., Youn, S.W., Kang, C.G., 'Finite Elemeny Analysis of Nano Deformation for the Hyper-fine Pattern Fabrication by using Nanoindentation,' J. of the KSPE, Vol.20, No.5, 2003
  7. Hibbitt, Karlsoon and Sorensen, ABAQUS Standard/EXplicit rel. 6.2, 2001
  8. Du, B., Mark, R., Vanlandingham, Zhang, Q., He, T., 'Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film the Atomic Force Microscope,' J. Mater. Res., Vol.16, No.5, pp.1487-1492, 2001 https://doi.org/10.1557/JMR.2001.0207
  9. Lu, Chung-Jen, Bogy, D.B., 'The Effect of Tip Radius on Nano-indentation Hardness Tests,' Int. J. Solid Struct., Vol.32, No.12, pp.1759-1770, 1995 https://doi.org/10.1016/0020-7683(94)00194-2
  10. Gad-el-Hak, M., The MEMS Handbook, CRC PRESS, pp.18-11,12, 2001
  11. Knapp, J.A., Follstaedt, D.M., Myers, S.M., Barbour, J.C., Friedmann, T.A., 'Finite-Element Modeling of Nanoindentation,' Journal of Applied Physics, Vol.85, No.3, pp.1460-1474, 1999 https://doi.org/10.1063/1.369178