Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

SHEAR BOND STRENGTH OF SELF-ETCHING ADHESIVES TO DENTIN AND SEM ANALYSIS

상아질에 대한 자가 산부식 접착제의 전단결합강도와 SEM 분석 비교

  • Cho, Young-Gon (Department of Conservative Dentistry, College of dentistry, Chosun University) ;
  • Roh, Kee-Sun (Department of Conservative Dentistry, College of dentistry, Chosun University) ;
  • Kim, Soo-Mee (Department of Conservative Dentistry, College of dentistry, Chosun University) ;
  • Lee, Young-Gon (Department of Conservative Dentistry, College of dentistry, Chosun University) ;
  • Jeong, Jin-Ho (Department of Conservative Dentistry, College of dentistry, Chosun University) ;
  • Ki, Young-Jae (Department of Conservative Dentistry, College of dentistry, Chosun University)
  • 조영곤 (조선대학교 치과대학 보존학교실) ;
  • 노기선 (조선대학교 치과대학 보존학교실) ;
  • 김수미 (조선대학교 치과대학 보존학교실) ;
  • 이영곤 (조선대학교 치과대학 보존학교실) ;
  • 정진호 (조선대학교 치과대학 보존학교실) ;
  • 기영재 (조선대학교 치과대학 보존학교실)
  • Published : 2003.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to compare shear bond strength and interfacial pattern of composite bond-ed to dentin using self-etching adhesive systems. Sixty extracted human molars with exposed occlusal dentin were divided into four groups and bonded with four adhesives and composites. Single Bond/Filtek Z 350(SB), Tyrian SPE-One-Step Plus/Aelitefil(TY), Prompt L-Pop/Filtek Z 250(LP), and One-Up Bond F/palfique Toughwell(OU). The results of this study were as follows; 1 Shear bond strength for OU was significantly lower than that of other groups(p＜0.05). No significant difference was founded among SB, TY, and LP. 2. Failure modes to dentin showed adhesive and mixed for SB TY and LP, but them for OU showed adhesive in all spceimens. 3. Dentin-resin interface showed close adaptation for SB, TY, and LP, but it showed gap for OU. 4. The hybrid layers for TY, LP OU were thinner than that of SB. Adhesive layers were observed between composite and hybrid layer, which were 5 $\mu\textrm{m}$ thick for TY and 10 $\mu\textrm{m}$ thick for OU.

Keywords

References

  1. Santini A. Plasschaert AJM and Mitchell S: Effect of composite resin placement techniques on the microleakage of two self-etching dentin-bonding agents. Am J Dent 14(3): 132-136, 2001
  2. Perdig o J, Frankenberger R, Rosa BT and Breschi L: New trends in dentin/enamel adhesion. Am J Dent Special issue 13:25-30. 2000
  3. Sonoda H. Sasafuchi Y, Kitasako Y, Arakawa M, Otsuki M and Tagami J: Pulpal response to a fluoride-releasing ail-in-one resin bonding system. Oper Dent 27: 271-277, 2002
  4. Zheng L, Pereira PNR, Nakajima M. Sano Hand Tagami J: Relationship between adhesive thickness and microtensile bond strength. Oper Dent 26:97-104, 2001
  5. Inoue S, Van Meerbeek B, Vargas M, YoshidaY, Lambrechts P and Vanherle G: Adhesion mechanism of self-etching adhesives. Advanced Adhesive Dentistry 3rd international Kuraray symposium 131-148, 1999
  6. Miyazaki M. Onose H and Moore BK: Effect of operator variability on dentin bond strength of two-step bonding systems. Am J Dent 13(2):101-104, 2000
  7. Bouillaguet S, Gysi P. Wataha JC, Ciucchi B, Cattani M, Godin CH and Meyer JM: Bond strength of composite to dentin using conventional, one-step, and self-etching adhesive systems. J Dent 29:55-61. 2001 https://doi.org/10.1016/S0300-5712(00)00049-X
  8. Tay FR, Gwinnett JA and Wei SHY: Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free. acetone-based, single bottle primer/adhesives. Dent Mat 12:236-244, 1996 https://doi.org/10.1016/S0109-5641(96)80029-7
  9. 조영곤과 조공철 : 자가 산부식 프라이머와 자가 산부식 접착제의 변연 미세누출. 대한치과보존학회지 27(5): 493-501. 2002 https://doi.org/10.5395/JKACD.2002.27.5.493
  10. Agostini FG, Kaaden C and Powers JM: Bond strength of self-etching primers to enamel and dentin of primary teeth. Am Ac Ped Dent 23(6) :481-486. 2001
  11. Brackett WW. Covey DA. St. and Germain HA: One-year clinical performance of a self-etching adhesive in class V resin composites cured by two methods. Oper Dent 27:218-222. 2002
  12. Frey O: Creating a reliable bond. An ail-in-one system. Am J Dent Special issue 13:85-87. 2000
  13. Hashimoto M, Ohno H. Kaga M, Endo K. Sano Hand Oguchi H: Fractographical analysis of resin-dentin bonds. Am J Dent 14(6) :355-360, 2001
  14. Li H, Burrow MF and Tyas MJ: The effect of load cycling on the nanoleakage of dentin bonding systems. Dent Mat 18:111-119, 2002 https://doi.org/10.1016/S0109-5641(01)00029-X
  15. Pontes DG, de Melo AT and Monnerat AF: Microleakage of new ali-in-one adhesive systems on dentinal and enamel margins. Quint lnt 33(2): 136-139, 2002
  16. Yoshiyama M. Matsuo T. Ebisu S and Pashley D: Regional bond strengths of self-etching/ self-priming adhesive systems. J Dent 26:609-616, 1998 https://doi.org/10.1016/S0300-5712(97)00046-8
  17. Hannig M and Fu B: Effect of air abrasion and resin composite on micro leakage of class V restorations bonded with self-etching primers. J Adhes Dent 3:2652-72, 2001
  18. Prati C, Chersoni S. Mongiorgi R and Pashley DH: Resin-infiltrated dentin layer formation of new bonding systems. Oper Dent 23:185-194, 1998
  19. Yoshiyama M, Urayama A. Kimochi T. Matsuo T and Pashley DR: Comparison of conventional vs self-etching adhesive bonds to caries-affected dentin. Oper Dent 25:163-169, 2000
  20. Kazemi RB, Meiers JC and Peppers K: Effect of caries disclosing agents on bond strengths of total-etch and self-etching primer dentin bonding systems to resin composite. Oper Dent 27:238-242, 2002
  21. Toledano M, Osorio, R, de Leonardi G, Resales-Leal. JI. Ceballos Land Cabrerizo-Vilchez MA: Influence of self-etching primer on the resin adhesion to enamel and dentin. Am J Dent 14(4) :205-210, 2001
  22. Yoshiyama M, Carvalho R, Sano H. Horner JA. Brewer PD and Pashley DH: Regional bond strengths of resins to human root dentine. J Dent 24:435-442. 1996 https://doi.org/10.1016/0300-5712(95)00102-6
  23. Pereira PNR, Okuda M. Nakajima M, Sano H. Tagami J and Pashley DR: Relationship between bond strengths and nanoleakage: evaluation of a new assessment method. Am J Dent 14(2): 100-104. 2001
  24. Croll TP: Self-etching adhesive system for resin bonding. J Dent Child: 176-181. 2000
  25. Miyazaki M. Iwasaki K. Onose H and Moore BK: Enamel and dentin bond strengths of single application bonding systems. Am J Dent 14(6) :361-366. 2001
  26. Tay FR. King NM. Shu BI and Pashley DH: Effect of delayed activation of light-cured resin composites on bonding of all-in-one adhesives. J Adhes Dent 3:207-225. 2001
  27. Abdalla AI and Garcia-Godoy F: Morphological characterization of single bottle adhesives and vital dentin interface. Am J Dent 15(1) :31-34. 2002
  28. Telles PDS. Machado MAAM and N r JE: SEM study of a self-etching primer adhesive system used for dentin bonding in primary and permanent teeth. Am Ac Ped Dent 20(4): 315-319. 1998
  29. Tay FR and Pashley DB: Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mat 17:296-308. 2001 https://doi.org/10.1016/S0109-5641(00)00087-7
  30. Nikaido T. Kunzelmann KH. Chen H. Ogata M. Harada N. Yamaguchi S. Cox CF. Hickel Rand Tagami J: Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dent Mat 18:269-275. 2002 https://doi.org/10.1016/S0109-5641(01)00048-3
  31. Gallo JR. Henderson M and Burgess JO: Shear bond strength to moist and dry dentin of four dentin bonding systems. Am J Dent 13(5) :267-270. 2000
  32. Ferrari M. Mason PN. Vichi A and Davidson CL: Role of hybridization on marginal leakage and bond strength. Am J Dent 13(6):329-336. 2000