Journal of Mechanical Science and Technology

  • 제17권8호
  • /
  • Pages.1113-1119
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Fatigue Analysis of Spot Welded Joints in Suspension Mounting Part

  • Yum, Youung-Jin (School of Mechanical and Automotive Engineering, University of Ulsan) ;
  • Chu, Young-Woo (School of Mechanical and Automotive Engineering, University of Ulsan) ;
  • Chu, Seok-Jae (School of Mechanical and Automotive Engineering, University of Ulsan) ;
  • Kim, Jung-Han (Body Engineering Team I, Hyundai Motor Company) ;
  • Hee You (Body Engineering Team I, Hyundai Motor Company)
  • 발행 : 2003.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Experimental and numerical analyses were performed to characterize the fatigue behavior of spot welded joints in suspension mounting of a passenger car body. Static and fatigue tests were carried out for the tensile-shear and cross-tension specimens. S-N curve and fatigue strengths were obtained from the fatigue test of various specimens. Nonlinear finite element analysis showed that fatigue behavior of spot welded joints could be well estimated in terms of Von Mises stress at the nugget edge. Fatigue behavior of spot welded joint was represented by Von Mises stress better than the fatigue load.

키워드

참고문헌

  1. Bae, D.H., 1991, 'Fracture Mechanical Evaluation of Fatigue Strength of a Single Spot Welded Lap Joint under Tension-Shear Load,' J. of KSAE, Vol. 13, No. 5, pp. 42-50
  2. Davidson, J. A., and Imhof,E.J.Jr., 1984, 'The Effect of Tensile Strength on the Fatigue Life of Spot-Welded Sheet Steels,' SAE International Congress and Exposition, Detroit, Michigan, SAE Paper 840110
  3. Japan Automotive Technology Committee, 1986, Fatigue Strength and Life Prediction of Spot Welded Structure of Automobile Body
  4. Japan Automotive Technology Committee, 1987, Handbook of Fatigue Strength of Spot Welded Joints
  5. Jung, W. S., Koo, J. M., Sohn, I. S. and Bae, D.H., 1996, 'Stress Distribution and Fatigue Strength Evaluation of IB-Type Spot Welded Lap Joint under Tension-Shear Load,' Proceedings of Autumn Conference of KSAE, pp. 25-31
  6. Oh, S.B., Sohn, I.S. and Bae, D. H., 1998, 'Stress Analysis and Fatigue Strength Evaluation on the IB-Type Spot Welded Lap Joint of Stainless Steel Sheet,' Proceedings of Spring Conference of KSAE, pp. 762-767
  7. Pollard, B., 1982, 'Fatigue Strength of Spot Welds in Titanium-Bearing HSLA Steels,' SAE International Congress and Exposition, Detroit, Michigan, SAE Paper 820284
  8. Sheppard, S. D., 1993, 'Estimation of Fatigue Propagation Life in Resistance Spot Welds,' ASTM STP 1211, pp. 169-185
  9. Sheppard, S.D. and Strange, M., 1992, 'Fatigue Life Estimation in Spot Welds: Initiation and Early Growth Phase,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 15, No. 6, pp. 531-549 https://doi.org/10.1111/j.1460-2695.1992.tb01293.x
  10. Sohn, I. and Bae, D., 1999, 'Fatigue Strength Evaluation of In-Plane Bending Type Single Spot Welded Lap Joint by Strain Energy Density,' Transactions of KSME, Series A, Vol. 23, No. 9, pp. 1435-1441
  11. Sohn, I. and Bae, D., 2001, 'Fatigue Strength Assessment of Spot-Welded Lap Joint Using Strain Energy Density Factor,' KSME International Journal, Vol. 15, No. 1, pp. 44-51
  12. VandenBossche, D. J., 1977, 'Ultimate Strength and Failure Mode of Spot Welds in High Strength Steels,' SAE Int. Automotive Engineering Congress and Exposition, Detroit, Michigan, SAE Paper 770214