Improvement of Quench Properties of a Superconducting Fault Current Limiter Using YBCO Films by Serial and Parallel Combinations

직.병렬 조합에 의한 박막형 초전도 한류기의 퀜치특성 개선

  • Published : 2003.07.01

Abstract

We improved quench properties of a superconducting fault current limiter (SFCL) based on YBCO thin films by their serial and parallel combinations. The SFCL consisted of 6 switching elements fabricated of 4 inch-diameter YBCO thin films. The quench currents of the switching elements were distributed between 33.9 A and 35.6 A. Simple serial connection resulted in imbalanced power dissipation between switching elements even at the quench current difference of 0.6 A. On the other hand, $2{\times}2$ and $3{\times}2$ stack combinations produced simultaneous quenches. The $3{\times}2$ stack combination showed better simultaneous quench behavior than the $2{\times}2$ stacks. This is suggested to be because the currents between switching elements in parallel connection of the $3{\times}2$ stacks were more effectively redistributed than the $2{\times}2$ stacks.

Keywords

References

  1. M. Noe and B. R. Oswald, Technical and economical benefits of superconduting fault current limiters in power systems, IEEE Trans. Appl. Superconduct., vol. 9, pp. 1347-1350, June 1999.[3] https://doi.org/10.1109/77.783552
  2. V. Meerovich, V. Sokolovsky, J. Bock, S. Gauss, S. Goren, and G. Jung, Performance of an inductive fault current limiter employing BSCCO superconducting cylinders, IEEE Trans. Appl. Superconduct., vol. 9, pp. 4666-4676, Decem. 1999 https://doi.org/10.1109/77.819336
  3. R. Wordenvich, V. Schneider, A. I. Zaitsev, R. Kutzner, T. Konigs and P. Lahl, Current limiting properties of superconducting $YBa_2Cu_3O_7$ films on various substrates, IEEE Trans. Appl. Superconduct., vol. 7, pp. 1021-1024, June 1997 https://doi.org/10.1109/77.614688
  4. B. Gromoll, G. Ries, W. Schmidt, H. P. Kramer, P. Kummeth, H. W. Neumuller and S. Fescher, Resistive current limiters with YBCO films, IEEE Trans. Appl. Superconduct., vol. 7, pp. 828-831, June 1997 https://doi.org/10.1109/77.614631
  5. K. Tekletsadik, M. Saravolac, A. Rowley, Development of a 7.5MVA supercon-ducting fault current limiter, IEEE Trans. Appl. Superconduct., vol. 9, pp. 672-675, June 1999 https://doi.org/10.1109/77.783385
  6. Hyo-Sang Choi, Hye-Rim Kim, Ok-Bae Hyun and Sang-Joon Kim, Quench properties of Y-Ba-Cu-O films after overpowering quenches, IEEE Trans. Appl. Superconduct., vol. 11, pp. 2418-2421, Mar. 2001 https://doi.org/10.1109/77.920350
  7. Hye-Rim Kim, Hyo-Sang Choi, Hae-Ryong Lim, In-Seon Kim and Ok-Bae Hyun, Initial quench development in uniform Au/Y-Ba-Cu-O thin films, IEEE Trans. Appl. Superconduct., vol. 11, pp. 2414-2417, Mar. 2001 https://doi.org/10.1109/77.920349
  8. Hyo-Sang Choi, Hye-Rim Kim and Ok-Bae Hyun, Operating properties of superconducting fault current limiters based on YBCO thin films, Cryogenics, vol. 41, pp. 163-167, 2001 https://doi.org/10.1016/S0011-2275(01)00064-9
  9. Hye-Rim Kim, Hyo-Sang Choi, Hae-Ryong Lim, In-Seon Kim and Ok-Bae Hyun, Quench distribution in superconducting fault current limiters at various voltages, Cryogenics, vol. 41, pp. 275-280, 2001 https://doi.org/10.1016/S0011-2275(01)00105-9
  10. Hyo-Sang Choi, Ok-Bae Hyun, Hye-Rim Kim, and Kwon-Bae Park, Switching properties of a hybrid type superconduting fault current limiter using YBCO stripes, IEEE Trans. Appl. Superconduct., vol. 12, pp. 1833-1838, Sep. 2002 https://doi.org/10.1109/TASC.2002.801816
  11. Hyo-Sang Choi, Ok-Bae Hyun, Hye-Rim Kim, Quench characteristics of resistive superconducting fault current limiters based on YBCO films, Physica C, vol. 351, pp. 415-420, 2001 https://doi.org/10.1016/S0921-4534(00)01632-4