대한전기학회논문지:전력기술부문A (The Transactions of the Korean Institute of Electrical Engineers A)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

상정사고별 배전측 부하분담 능력 분석과 도체 규격 검토

Analysis of the Load Transfer Capacity and Study of Conductor Sizes for Contingency Levels in Distribution Systems

  • 조남훈 (한국전력공사 전력연구원) ;
  • 전영재 (한국전력공사 전력연구원) ;
  • 한용희 (한국전력공사 구조조정실) ;
  • 한병성 (전북대학교 전기공학과)
  • 발행 : 2003.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the analysis of the load transfer capacity and study of conductor size for variable contingencies in distribution systems. The operation capacity of feeders was changed to improve operation efficiency in KEPCO, considerations for contingencies are still based on the previous capacity. In order to cope with the changes such as operation capacity, it is necessary to study whether the present "contingency support criteria" is reasonable or not, also to confirm the whether the present criteria should be improved or not. We analyze the load transfer capacity and conductor size on a distribution system for contingency levels such as the substation-level, bank-level, feeder-level, and zone-level.one-level.

키워드

참고문헌

  1. H. Lee Willis, Power Distribution Planning Reference Book, MARCEL DEKER INC., New York, 1997
  2. S. K. Khator and L. C. Leung, 'Power Distribution Planning: A Review of Models and Issues', IEEE Trans. Power Systems, Vol. 12, No. 3, August 1997 https://doi.org/10.1109/59.630455
  3. Q. Zhou, D. Shirmohammadi, W. H. E. Liu, 'Distribution Feeder Reconfiguration for Service Restoration and Load Balancing', IEEE Transaction on Power System, Vol. 12, No. 2, pp. 724-729, pp. 724-729, May 1997 https://doi.org/10.1109/59.589664
  4. L. C. Leung, S. K. Khator, and J. C. Schnerpp, 'Planning Substation Capacity Under the Single-Contingency Scenario', IEEE Trans, on Power System, Vol. 10, No. 3, pp. 1442-1447, August 1995 https://doi.org/10.1109/59.466506
  5. S. Mandal and A. Pahwa, 'Optimal Selection of Conductors for Distribution Feeders', IEEE Trans. Power Systems, Vol. 17, No. 1, pp. 192-197, February https://doi.org/10.1109/59.982213
  6. S. Sivangaraju, N. Sreenivasulu, M. Vijayakumer, and T. Ramana, 'Optimal conductor selection for radial distribution systems', Electric Power System Research, Vol. 63, No. 2, pp. 95-103, September 2002 https://doi.org/10.1016/S0378-7796(02)00081-0
  7. H. N. Tram, and D. L. Wall, 'Optimal Conductor Selection in Planning Radial Distribution Systems', IEEE Trans. Power System, Vol. 3, No. 1, pp. 200-206, February 1988 https://doi.org/10.1109/59.43199
  8. Z. Wang, H. Liu, D. Yu, X. Wang, and H. song, 'A Practical Approach to the Conductor Size Selection in Planning Radial Distribution Systems', IEEE Trans. Power Delivery. Vol. 15, No. 1, pp. 350-354, January 2000 https://doi.org/10.1109/61.847272
  9. 한국전력공사 배전처, '22.9kV-Y 배전선로 적정운전용량 기준선정에 관한 연구(최종보고서)', 한국전력공사, EESRI-93P-109, 1994. 10
  10. 한국전력공사 배전처, '2001년도 배전설비 고장분석 및 예방대책', 한국전력공사, 사내용, 2001. 5
  11. 한국전력공사 기술연구원, '대용량 배전에 관한 연구(최종보고서)', 한국전력공사, KRC88D-J01, 1991. 3
  12. 조남훈, 하복남, 이흥호, '국내 배전계통의 최적 개폐기 설치 기준', 대한전기학회 논문지 A, 51권, 5호, pp. 238-246, 2002. 5
  13. 한국전력공사 품질보증실, '설계기준 3001(총칙)-배전회선당 기준용량과 기준최대 긍장', 한국전력공사, 97봉사단-181, pp9, 1999. 7