대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제5권1호
  • /
  • Pages.129-141
  • /
  • 2003
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지

센서 링이 내식성과 기계적 특성에 관한 연구

A Study on Ferrite Stainless Steel Corrosion Resistance or Mechanical Characteristics of 434LD2 ABS Sensor Ring

  • 양현수 (군장대학 자동차ㆍ기계학부) ;
  • 금영준 (금호디젤상사) ;
  • 정풍기 (군장대학 자동차ㆍ기계학부 겸임교수)
  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this thesis, using the 400 series ferrite stainless steel such as 434LD$_2$ which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD$_2$ ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of $H_{RB}$ 80 and tensile test, 434LD$_2$ ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.

키워드

참고문헌

  1. M. Hanada, Y. Takeda and N. Amana, 'Development of a P/M Sensor Ring for Use in an Antilock Brake System', Metal Powder Rep. Vol. 44, No.10, pp. 695-698. 1989
  2. M. Hanada, Y. Takeda, N. Amano and T. Koiso, 'Development of a Powder Metallurgy Sensor Ring for Use in an Antilock Brake System', Sumitomo Electric Technical Review, NO. 28, January. pp. 234-240, 1989
  3. M. tokunaga,'Brake System', Journal of the Society of Automotive Engineers of Japan, Vol.39, No.6, pp. 656, 1985
  4. Amano, N, Koiso, T., 'ABS Ring Resist Corrosion and Chipping', Metal Power Report, Vol. 48, No.1, pp. 22-25, 1993 https://doi.org/10.1016/0026-0657(93)92002-M
  5. 양현수, 곽창섭, 임종국, ‘410L 스텐인레스 강의 ABS 센서 링 제조를 위한 자기적 특성’, 한국열처리공학회, Vol. 11, No. 4, pp. 1-7, 1998
  6. T. Nishikawa, 'Dacrotizing', Metal Finishing Practice, Vol. 32, No.6, pp. 272-279, 1985
  7. 양현수, 곽창섭, 김경환, 임종국, '400계열 스텐인레스 스틸 분말을 사용한 ABS Sensor Ring 개발', 산업안전학회, Vol. 13, No. 3, pp. 60-66, 1998
  8. Moyer, K., 'A Beginning Toward Understanding the Corrosion Resistance of Ferritic Stainless Steels', SAE Technical Paper Series , No. 930450, 1993
  9. K. Majmrle, J. M. capus., 'Powder Metallurgy', Vol. 23(2), pp. 95-99 1990