Comparison Study on Quality Characteristics of Surface Treatment of Stone Board Materials by Water-jet System and Flame-burner

워터젯 수압분사와 화염버너에 의한 석판재 표면처리의 품질특성 비교연구

  • 강지호 (군장대학 산업경영과) ;
  • 장명환 (대한광업진흥공사 자원개발처)
  • Published : 2003.03.01

Abstract

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

Keywords

References

  1. 강지호, '워터젯 시스템을 이용한 석재표면 처리장치의 개발', 산업경영시스템학회지 2003년도 춘계학술논문집, 미출간
  2. 대한광업진흥공사, 석재자원 특성 조사보고 1호, pp.130, 1989
  3. 여인옥, 전용원, '화강암의 열팽창 특성에 관한 연구', 한국자원공학회지, Vol. 29, pp. 263-275, 1992
  4. 이형원, 신재섭, '화강암질 석재의 열파괴 특성연구', 한국자원공학회지, Vol. 27, pp.31-42, 1990
  5. 이형원, 이정인, '고온하에서 암석의 열충격, 열팽창 및 열파괴에 관한 연구', 한국암반공학회지 Vol. 5, pp. 22-40 1995
  6. 이동수, '석재응용의 이론과 실무', 한불문화출판, 2002
  7. Atkinson, R.H., Bamford, W.E., Broch, E., Deere D.U., 'Suggested methods for determining hardness and abrasiveness of rocks', Int. J. Rock Mech. and Min. Sci., 15(3), 1978, pp.89-98
  8. Burner, S.J. and Handin, J., 'Thermal expansion and cracking of three confined, water-saturated igneous rocks to 800$^{\circ}C$', Rock Mech. and Rock Eng., Vol.16, 1983, pp.181-198
  9. Friedman, M. and Johnson, B., 'Thermal crack in unconfined Sioux Quarzite', Proc. 19th US Symp. on Rock Mech., 1987, pp.423-43 단
  10. FLOW international corporation, 'Husky S-200 Power Unit Operation & Service Manual'. 1995