초록
지진하중조건에서 포화된 모래의 액상화 가능성은 심도 있는 연구가 진행되어 왔다. 이러한 연구에서 대표적인것은 실험실에서 반복삼축압축시험에 의하여 모래의 반복강도를 결정하는 것이다. 본 연구는 재성형된 포화 균등모래의 액상화 특성에 있어서 시편의 성형방법에 따른 영향을 검증하기 위하여 수행되었다. 건조시료의 공기중낙하다짐, 습윤층다짐, 습윤진동층다짐 등 3가지 방법에 의하여 동일한 밀도로 다짐된 포화된 균등한 모래에 대하여 삼축압축시험이 수행되었다. 같은 밀도에서 다른 방법에 의하여 성형된 포화된 균등한 모래의 액상화 저항특성인 반복응력비는 크게 다른 것으로 확인되었다.
The liquefaction potential of saturated sands under seismic loading conditions has been carefully considered by many investigations. Typical of these investigations is the laboratory determination of cyclic strength of sands by means of cyclic triaxial tests. This study was conducted to investigate the effects of the method of sample preparation on the liquefaction characteristics of remolded samples of saturated uniform sands. Cyclic triaxial tests were performed on saturated uniform sand compacted to the same density by 3 different procedures of pluvial compaction through air, pluvial compaction through water and vibratory compaction. It was validated that the cyclic stress ratio of remolded saturated uniform sands by different compaction procedures at the same density was very different.