Hysteresis on Boiling Heat Transfer at Low Temperature on Enhanced Tubes in a Flooded Evaporator

만액식 증발기의 열전달 촉진관에서 저온 비등열전달의 이력현상 특성

  • Published : 2003.04.01

Abstract

The boiling characteristics for R134a are studied to clarify the hysteresis at low temperature on enhanced tubes of a flooded evaporator. Initial boiling conditions, refrigerant temperature, and inlet temperature of the chilled water are considered as the key parameters of the experiments. Unlike previous studies of the boiling heat transfer with uniform heat flux and uniform wall temperature, the wall temperature was varied along the tube. In, this study, it was found that the hysteresis of the temperature overshoot (705) at the onset of nucleate boiling initially at the inlet section of the tube. It is also concluded that the abnormal operation can be avoided during the low temperature boiling if the refrigeration system is started with LMTD larger than $3.4^{\circ}C$ at initial stage and larger than $1.0^{\circ}C$ at normal stage.

Keywords

References

  1. Chem. Eng. prog. symp. ser. v.51 no.16 Surface variables in nucleate boiling Corty,C.;Foust,A.S.
  2. Heat Transfer Eng. v.9 no.3 Departure from natural convection (DNC) in low-temperature boiling heat transfer encountered in cooling microelectronic LSI devices Oktay,S.
  3. ASEM J. Heat Transfer v.104 Pool boiling heat transfer from enhanced surfaces to dielectric fluids Marto,P.J.;Lt.Lapere,V.J.
  4. 3rd National Conference incorporating 1st European Conference on Thermal Science Hysteresis characteristics of nucleate pool boiling heat transfer Wang,B.X.;Ma,J.;Shi,M.H.
  5. Int. J. Heat Mass Transfer v.36 no.18 Analysis on hysteresis in nucleate pool boiling heat transfer Shi,M.H.;Ma,J.;Wang,B.X.
  6. Automatic Control Lecture Meeting of SAREK Experimental Equations of R134a Evaporator Tubes and Design of Flooded Evaporators Yoon,P.H.;Jeong,J.;Park,J.I.;Kang,Y.T.