DOI QR코드

DOI QR Code

Preparation of Porous Ceramics Sound Absorbent Material Using Sewage Sludge Slag

하수슬러지 슬래그를 이용한 다공성 세라믹스 흡음재료 제조

  • 신대용 (강원대학교 석재복합 신소재제품 연구센터) ;
  • 한상목 (강원대학교 신소재공학과)
  • Published : 2003.03.01

Abstract

The effects of content and particle size of sewage sludge slag on the sound absorption was investigated and the physical$.$mechanical properties of porous ceramics for sound absorbent material was studied. The physical$.$mechanical properties of specimens have depended on sintering temperature and slag content without particle size effect of slag. As water glass content increase and particle size of slag decrease at the same slag content, physical$.$mechanical properties of them have been improved. The bulk density and compressive strength of specimens with the batch composition of 77∼89 wt% of slag content and particles with 1∼3 mm, and sintered at 1,050$^{\circ}C$ for 2 h were 1.48∼1.71 and 86∼163 kgf/$\textrm{cm}^2$, respectively. The specimens with 1∼3 mm and <1 mm of particles size showed good sound absorption property at low frequency and high frequency region. With increasing thickness of specimens, sound absorption properties at low frequency region were increased.

다공질 세라믹스 흡음재료의 흡음특성과 물리.기계적 특성에 미치는 하수슬러지 슬래그 첨가량과 입경 효과에 대하여 조사하였다. 시편의 물리.기계적 특성은 슬래그 입경과 관계 없이 소성온도가 증가하고 슬래그 함량이 감소함에 따라 증가하였으며, 슬래그의 함량이 일정한 시편은 물유리 첨가량이 증가하고 슬래그 입경이 감소함에 따라 증가하였다. 1~3mm 크기의 슬래그를 약 77~89 wt% 함유하고 1,05$0^{\circ}C$에서 2시간 소성한 시편의 부피비중은 1.48~1.71, 압축강도 85~163 kgf/$\textrm{cm}^2$을 나타내었으며, 1~3mm의 슬래그를 이용한 시편은 저주파영역, 슬래그 입경이 1 mm이하인 시편은 고주파영역의 흡음특성이 향상되었으며, 시편의 두께가 증가함에 따라 저주파영역의 흡음특성이 향상되었다.

Keywords

References

  1. J. Environ. Hi-Tech. v.7 A Plan of Reduction and Recycling of Sewage Sludge K.S.Kim
  2. J. Kor. Solid Wastes Eng. Soc. v.14 no.1 Characteristics of Composition and Incineration of Sewage Sludge Y.S.Won;C.H.Lee;S.P.Choi
  3. J. Ceram. Soc. Jpn. v.107 no.6 Effect of Firing Atmosphere on Extraordinary Expansion of Sintered Brick from Incinerated Ash of Sewage Sludge N.Takeuchi;H.Takahashi;M.Wakamatsu https://doi.org/10.2109/jcersj.107.551
  4. J. Kor. Solid. Waste Eng. Soc. v.17 no.1 Lightweight Aggregate Made from Dewatered Sludge of Sewage Treatment Plant I.M.Park;J.S.Oh
  5. J. Kor. Soc. for Noise and Vibration Eng. v.8 no.1 A Study on the Effects of Absorptive Treatment for the Highway Noise Barriers J.S.Kim;L.F.Cohn;K.S.Kim
  6. J. Acoustic Soc. Am. v.82 no.5 Modelization of Layered Sound Absorption Materials with Transfer Matrices J.F.Allard;Y.Champoux;C.Depolier https://doi.org/10.1121/1.395796
  7. J. Environ. Hi-Tech. v.9 The Preparation of Sound Absorption Plate for Photocatalytic Property Using Industrial Wastes M.C.Lim
  8. J. Kor. Ceram. Soc. v.35 no.6 Preparation for Porous Ceramics Using Low Grade Clay S.M.Han;D.Y.Shin;S.K.Kang
  9. Kangwon Regional Environ. Tech. Development Center Report Disposal Techniques of Sewage Sludge(in Kor) S.M.Han;D.Y.Shin
  10. J. Kor. Ceram. Soc. v.39 no.9 Synthesis of Ceramic Support for Immobilization of Microorganisms Using Fly Ash D.Y.Shin;S.M.Han;S.G.Choi https://doi.org/10.4191/KCERS.2002.39.9.857
  11. J. Advanced Mineral aggregate Composites v.7 The Study of Durable Solidification of Incinerated Sewage Sludge and Glass Waste S.M.Han;D.Y. Shin;B.G.Yun;S.K.Kim
  12. J. Kor. Ceram. Soc. v.38 no.12 Sintering Properties of Renewed Al₂O₃Ceramics with Particle Size and Addition Amount of Recycling Powder D.Y.Shin;K.N.Kim;S.M.Han