대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

Half Bridge 인버터에 의한 자동차 헤드라이트용 전자식 안정기 개발

Development of Electronic Ballast for Automotive Headlight Lamp using Half Bridge Inverter

  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we suggested electronic ballast with the half bridge inverter for the automotive HID lamp. The electronic ballast for the automotive HID lamp should be supplied by the low-frequency square wave avoiding the acoustic resonance. When the HID lamp is hot state, the electronic ballast should supply the sufficient current to the take over to the lamp at the re-strike ignition state for a few milli-second. We have introduced the new take-over current control method that could have control operating frequency and minimize circuits to the take over current circuits.

키워드

참고문헌

  1. dr Chr. Meyer and ir H. Nienhuis, 'Dischrge Lamps' PHILIPS TECHNICAL LIBRARY 1988, pp216-226
  2. Alberto Reatti, 'Low-cost high power density electronic ballast for automotive HID lamps', IEEE Trans power electronics, VOL15, No2. March 2000, pp.361-368 https://doi.org/10.1109/63.838109
  3. W.H.Lake and J.M. Davenport, 'low watage metal halide lamps', Journal of IES, Japan, 1982, pp.66-73
  4. N.Funumori, H.Nishimura, K.Uchilhashi, and M.Fukuhara. 'A study of HID lamp life when operated by electronic ballasts',Journal of the illuminating Engineering society, winter 1995,pp41-47
  5. 조규찬, '자동차 고압 방전등 안정기의 설계 및 해석', 서울대학교 대학원, 2001
  6. 김희준, '스위칭 전원의 기본 설계', 성안당
  7. Chin S.Moo, Tsai F. Lin and Ying C. Chung, 'Designning an ignitor for short-arc xenon lamps', IEEE IAS annual Meeting,pp612-617,1999 https://doi.org/10.1109/IAS.1999.800015
  8. A. Fratta.F. Villata. E. Canavesio.'Comparative design of a new DC/DC conversion scheme for gas dischrge lamp in automotive applications', IEEE pp542-548 https://doi.org/10.1109/ISIE.1996.548547