References
- Schneider, H. W., 1978, 'Equation of the Growth Rate of Frost Forming on Cooled Surfaces,' Int. J. Heat Mass Transfer, Vol. 21, pp. 1019-1024 https://doi.org/10.1016/0017-9310(78)90098-4
- Lee, Y. B., Ryu, I. S. and Ro, S. T., 2002, 'The Effect of Environmental Parameters on Frost Formation on a Horizontal Cylinder,' Trans. of KSME, Vol. 26, No. 2, pp. 253-260
- Cremers, C. J. and Mehra, V. K., 1980, 'Frost Formation on Vertical Cylinders in Free Convection,' ASME J. Heat Transfer, Vol. 104, No. 1, pp. 3-7
- Sengupta, S., Sherif, S. A. and Wong, K. V., 1998, 'Empirical Heat Transfer and Frost Thickness Correlations during Frost Deposition on a Cylinder in Cross-Flow in the Transient Regime,' Int. J. Energy Res., Vol. 22, pp. 615-624 https://doi.org/10.1002/(SICI)1099-114X(19980610)22:7<615::AID-ER383>3.0.CO;2-L
- Ostin, R. and Andersson, S., 1991, 'Frost Growth Parameters in a Forced Air Stream,' Int. J. Heat Mass Transfer, Vol. 14, No. 4/5, pp. 1009-1017 https://doi.org/10.1016/0017-9310(91)90012-4
- Yonko, J. D. and Sepsy, C. F., 1967, 'An Investigation of the Thermal Conductivity of Frost while Forming on a Flat Horizontal Plate,' ASHRAE Trans., Vol.73, No. 2, pp. 1.1-1.11
- Tokura, I., Saito, H. and Kishinami, K., 1983, 'Study on Properties and Growth rate of Frost Layers on Cold Surfaces,' J. Heat Transfer, Vol. 105, pp. 895-901 https://doi.org/10.1115/1.3245679
- Gabriel Biguria and Leonard A. Wenzel, 1970, 'Measurement and Correlation of Water Frost Thermal Conductivity and Density,' I&EC Fundamentals, Vol. 9, No. 1, pp. 129-138 https://doi.org/10.1021/i160033a021
- Lee, K. S., Kim, Y. C. and Jhee, S., 2001, 'Correlation of Frost Properties Considering the Environmental Parameters over a Cold Flat Plate,' Trans. of KSME, Vol. 8, No. 25, pp. 1046-1052
- Hosoda, T. and Uzuhashi, H., 1967, 'Effects of Frost on the Heat Transfer Coefficient,' Hitachi review, Vol. 16, No. 6, pp. 254-259
- Lee, K. S., Lee, T. H. and Kim, W. S., 1994, 'Heat and Mass Transfer of Parallel Plate Heat Exchanger under Frosting Condition,' SAREK Journal, Vol. 6, No. 2, pp. 155-165
- Kline, S. J., 1985, 'The Purposes of Uncertainty Analysis,' ASME J. Fluid Engineering, Vol. 107, pp. 153-160 https://doi.org/10.1115/1.3242449
- Sahin, A. Z., 1991, 'Density of Frost Layer during the Crystal Growth Period,' The Arabian J. for Science and Engineering, Vol. 16, pp. 485-493
- Luer, A. and Beer, H., 2000, 'Frost Deposition in a Parallel Plate Channel under Laminar Flow Conditions,' Int. J. Therm. Sci., Vol. 39, pp. 85-95 https://doi.org/10.1016/S1290-0729(00)00193-8
- Sherif, S., A., Raju, S. P., and Padki, M. M., 1990, 'A Semi-Emperical Transient Method for Modeling Frost Formation on a Flat Plate,' ASHRAE Trans., Vol. 139, pp. 15-23
- Sahin, A., Z., 2000, 'Effective Thermal Conductivity of Frost During the Crystal Growth Period,' Int. J. Heat Mass Transfer, Vol. 43, pp. 539-553 https://doi.org/10.1016/S0017-9310(99)00162-3