Journal of Mechanical Science and Technology

  • 제17권3호
  • /
  • Pages.357-369
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

A Study on the Design of Electromagnetic Valve Actuator for VVT Engine

  • Park, Seung-hun (Graduate school, Department of Mechanical Engineering, Ajou University) ;
  • Kim, Dojoong (Department of Mechanical and Automotive Engineering, University of Ulsan) ;
  • Byungohk Rhee (Department of Mechanical Engineering, Ajou University) ;
  • Jaisuk Yoo (Department of Mechanical Engineering, Ajou University) ;
  • Lee, Jonghwa (Department of Mechanical Engineering, Ajou University)
  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Electromagnetic valve (EMV) actuation system is a new technology for improving fuel efficiency and at the same time reducing omissions in internal combustion engines. It can provide more flexibility in valve event control compared with conventional variable valve actuation devices. The electromagnetic valve actuator must be designed by taking the operating conditions and engine geometry limits of the internal combustion engine into account. To help develop a simple design method, this paper presents a procedure for determine the basic design parameters and dimensions of the actuator from the relations of the valve dynamics, electromagnetic circuit and thermal loading condition based on the lumped method. To verify the accuracy of the lumped method analysis, experimental study is also carried out on a prototype actuator. It is found that there is a relatively good agreement between the experimental data and the results of the proposed design procedure. Through the whole speed range, the actuator maintains proper performances in valve timing and event control.

키워드

참고문헌

  1. Ahmad, T. and Theobald, M. A., 'A Survey of Variable Valve Actuation Technology,' SAE paper 891674
  2. Butzmann and Melbert, J., 2000, 'Sensorless control of Electro-Mechanical Actuators for Variable Valve Train,' SAE 2000-01-1225
  3. Chun, D. J. and Lee, J. K., 2000, 'An Analysis of Valve Train Behavior Considering Stiffness Effects,' KSME International Journal, Vol. 14, No. 3, pp. 283-290
  4. Chung, J. T., 1996, 'A Design of the VCM Coil Diameter of a Rotary Actuator in a Computer Hard Disk Drive,' KSME International Journal, Vol. 10, No. 1, pp. 22-30 https://doi.org/10.1007/BF02953940
  5. Dresner, T. and Barkan, P., 'A Review of Variable Valve Timing Benefits and Modes of Operation,' SAE paper 891676
  6. Heywood, J. B., 1988, 'Internal Combustion Engine Fundamentals,' McGraw Hill
  7. Joo, S. H. and Chun, K. M., 2000, 'Swirl Effect on the Flame Propagation at Idle in a Spark Ignition Engine,' KSME International Journal, Vol. 14, No. 12, pp. 1412-1420
  8. Kaplan, J. A., 1990, 'Modeling The Spark Ignition Engine Warm-Up Process To Predict Component Temperatures,' M.I.T.
  9. Katsuhiko Ogata, 1998, 'System Dynamics,' 3rd edition, Prentice Hall
  10. Kekedjian, H. and Krepec, T., 1994, 'Further Development of Solenoid Operated Gas Injectors with Fast Opening and Closing,' SAE paper 940450
  11. Lewis, R. W., Morgan, K., Thomas, H. R., Seetharamu, K. N., 1996, 'The Finite Element Methodin Heat Transfer Analysis,' Wiley
  12. McLyman and Wm. T. Colonel, 1997, 'Magnetic Core Selection for Transformers and Inductors,' Marcel Dekker
  13. Michael M. Schechter and Michael B. Levin. 'Camless Engine,' SAE paper 960581
  14. Park, S. H. and Lee, J. H., 'The Analysis and Experiments foe the Design of Electro-mechanical Variable Valve Train System,' KSAE, Vol. 9, No. 3, pp. 60-67
  15. Park, S. H. and Lee, J. H., 2002, 'The Analytic and Experimental Reserch on Dynamic Characteristics of EMV System,' KSAE, Vol. 10, No. 3
  16. Seely, S., 1962, 'Electrical and Electronic Engineering Series,' Mcgraw Hill
  17. Sen, P. C., 1997, 'Principles of Electric Machines and Power Electronics,' Wiley & Sons, Inc.
  18. Sono, H. and Umiyama, H., 'A Study of Combustion Stability of Non-Throttling S. I. Engine with Early Intake Valve Closing Mechanism,' SAE paper 945009
  19. Stein, R., Galietti, K. and Leone, T., 'Dual Equal VCT-A Variable Camshaft Timing Strategy for Improved Fuel Economy and Emissions,' SAE paper 950975
  20. Theobald, M. A., 1994, 'Control of Engine Load Via Electro-Mechanical Valve Actuator,' SAE paper 940816
  21. Urata, Y., Umiyama, H., Shimizu, K., Fujiyoshi, Y., Sono, H. and Fukuo, K., 'A Study of Vehicle Equipped with Non-Throttling S. I. Engine with Early Intake Valve Closing Mechanism,' SAE paper 930820
  22. Woodson, H.H. Melcher, J. R., 1968, 'Electromechanical Dynamics,' Robert E. Krieger Publishing Company
  23. Electromechanical Dynamics Woodson, H. H.;Melcher, J. R.