참고문헌
- Sparrow, E. M. and Larson, E. D., 1982, 'Heat Transfer From Fin-Pins Situated in an Oncoming Longitudinal Flow Which Turns to Crossflow,' International Journal of Heat and Mass Transfer. Vol. 25, No. 5, pp. 603-614 https://doi.org/10.1016/0017-9310(82)90165-X
- Wadsworth, D. C., 1989, 'Cooling of a Multichip Electronic Module by Means of Confined Two-Dimensional Jets of Dellectric Liquid,' M.S.M.E. Thesis, Purdue University
- Sullivan, P. F., Ramadhyani, S., and Incropera, F. P., 1992a, 'Extended Surfaces to Enhanced Impingment Cooling With Single Circular Liquid Jets,' Proceedings of the ASME/JSME Joint Conference on Electronic Packaging. San Jose, CA, ASME EEP-Vol. 1-1, pp. 207-216
- Sullivan, P. F., Ramadhyani, S., and Incropera, F. P., 1992b, 'Use of Smooth and Roughened Spreader Plates to Enhance Impingment Cooling With Single Circular Liquid Jets,' National Heat Transfer Conference, San Diego. CA, ASME HTD-Vol. 206-2, pp. 103-110
- Teuscher, K. L., 1992, 'Packaging Methods for Jet Impingment Cooling of an Array of Discrete Heat Sources,' M.S.M.E. Thesis, Purdue University
- Priedeman, D., Callahan, V., and Webb, B. W., 1993, 'Enhanced Surface Liquid Jet Impingement Heat Transfer,' The 1993 ASME Winter Annual Meeting, New Orleans. Louisiana, ASME HTD-Vol. 263, pp. 43-48
- Baughn, J. W., Mesbah, M. and Yan, X., 1993, 'Measurements of local heat transfer for an impinging jet on a cylindrical pedestal,' Turbulent Enhanced Heat Transfer ASME. HTD-Vol. 239, pp. 57-62
- Lee, D. H., Won, S. Y., Kim, Y. T., and Chung, Y. S., 2001, 'Turbulent Heat Transfer from a Flat Surface to a Swirling Round Impinging Jet,' International Journal of Heat and Mass Transfer, Vol. 45, No. 1, pp. 223-227 https://doi.org/10.1016/S0017-9310(01)00135-1
- Lee, D. H., Lee, Y. M., Kim, Y. T., Won, S. Y., and Chung, Y. S., 2001, 'Heat Transfer Enhancement by the Perforated Plate Installed Between an Impinging Jet and the Target Plate,' International Journal of Heat and Mass Transfer, Vol. 45, No. 1, pp. 213-217 https://doi.org/10.1016/S0017-9310(01)00134-X
- Chung, Y. S., Lee, D. H., and Lee, J. S., 1999, 'Heat transfer Characteristics of an Axisymmetric Jet Impinging on the Rib-Roughened Convex Surface,' International Journal of Heat and Mass Transfer, Vol. 42, pp. 2101-2110 https://doi.org/10.1016/S0017-9310(98)00313-5
- Chung Young Suk, Lee Dae Hee, and Lee Joon Sik, 1998, 'Heat Transfer Cefficient Measurement by a Jet Impinging on a Rib-Roughened Convex Surface,' Trans. of the KSME, B, Vol. 22, No. 3, pp. 373-385
- Dunne, S. T., 1983, 'A Study of Flow and Heat Transfer in Gas Turbine Cooling Passages,' D. Phil. Thesis. Oxford University, UK
- Kline, S. J., McKlintock, F. A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- Rajaratnam, N., 1976, 'Turbulent Jet,' Elsevier Scientific, The Netherlands
- Lee, D. H., Shung, Y. S., and Kim, D. S., 1997, 'Turbulent Flow and Heat Transfer Measurements on a Curved Surface with a Fully Developed Round Impinging Jet,' International Journal of Heat and Fluid Flow, Vol. 18, No. 1, pp. 160-169 https://doi.org/10.1016/S0142-727X(96)00136-1
- Lee Dae Hee, Won De Youl, Lee Young Min, and Cho Heon No, 2000, 'The Effect of Nozzle Diameter on Heat Transfer to a Fully Developed Round Impinging Jet,' Trans. of the KSME. B. Vol. 24, No. 4, pp. 519-525