Abstract
This paper described the ultimate strength and deformation limit of new uniplanar T-joints in cold-formed square hollow sections. The new T-joint had the configuration that only a branch member was oriented at 45 degrees to a chord member in the plane of the truss. This study focused on the branch-rotated T-joints governed by chord web failure. Based on the test results of the T-joint in cold-formed square hollow sections, the deformation lirnit was found to be 3%B for $16.7{\leq}2(B/T){\leq}33.3$ and $0.63{\leq}(b_1/B)=0.7$. Existing strength formulas for traditional T-joint were investigated, and the new strength formula for the branch-rotated T-joint was proposed. This proposed formula was based on column buckling theory considering the rounded corners of cold-formed square hollow sections. Finally, the optimization condition of yield stress and $2{\gamma}$ was recommended to select the optimized chord section.
본 논문에서 새로운 냉간성형 각형강관 T형 접합부의 최대내력과 변형제한치에 대한 연구이다. 새로운 접합부는 지관을 트러스 평면에 대하여 $45^{\circ}$회전시켜서 주관에 용접하는 형상이고, 지관 $45^{\circ}$회전형 T형 접합부 실험결과 중에서 주관 웨브 파괴가 지배하는 접합부만을 대상으로 설정하였다. $16.7{\leq}2{\gamma}(B/T){\leq}33.3$이고 $0.63{\leq}{\beta}(b_1/B){\leq}0.7$ 범위의 지관 $45^{\circ}$회전형 T형 접합부에 대하여, 최대내력을 정의를 위한 변형제한치는 주관폭의 3% 변형량(3%B) 으로 제안하였다. $0.63{\leq}{\beta}{\leq}0.7$ 범위의 기본형에 대한 기존의 항복선모델을 검토하고, 지관 $45^{\circ}$회전형에 대한 내력식을 제안하였다. 제안내력식은 기둥좌굴이론에 근거하고 있고, 냉간성형시 발생한 곡률부분을 고려하였다. 최종적으로 최적화된 주관단면 선택을 위한, 항복응력도와 $2{\gamma}$의 최적조건을 제안하였다.