References
- 강진식, 김태형, 윤종구, 정성균, 이승호 (2001). “쇼트피닝에 의한 기어강의 부식특성에 관한 연구”, 대한기계학회 2001년도 추계학술대회논문집 A, pp 216-221
- 박경동, 정찬기 (2001). “DIN50RrV4-SAE9254강의 피로강도에 미치는 압축잔류응력의 영향”, 한국해양공학회지, 제15권, 제3호, pp 94-100
- 안석환, 임우조 (2000). “해수환경중 캐비테이션 침식·부식 하에서의 응력부식균열 거동(Ⅰ)”, 한국어업기술학회지, 제36권, 제2호, pp 132-138
- 안석환, 임우조 (2000). “해수환경중 캐비테이션 침식·부식 하에서의 응력부식균열 거동(Ⅱ)”, 한국어업기술학회지, 제36권, 제2호, pp 139-146
- 윤병하, 김대룡 (1997). “금속의 부식과 방식개론”, 형설출판사
- 이승호, 김희송 (1999). “스프링강의 피로거동에 미치는 2단 쇼트피닝의 효과”, 대한기계학회논문집 A권, 제23권, 제1호, pp 140-147
- 이종규, 김정규 (1997). “피로강도 및 수명에 미치는 shotpeening에 의한 잔류응력의 영향”, 대한기계학회논문집 A권, 제21권, 제9호, pp 1498-1506
- 이학렬 (1990). 금속부식공학, 연경문화사
- 정석주, 백상도 (1998). “스프링강의 피로특성에 미치는 쇼토피닝의 영향”, 대한기계학회논문집 A권, 제22권, 제6호, pp 1009-1015
- 정성균, 이승호, 정석주 (2001). “쇼트피닝 가공조건이 피닝강도에 미치는 영향”, 대한기계학회논문집 A권, 제25권, 제10호, pp 1590-1596
- Fontana, M.G. (1986). Corrosion Engineering, 3rd Edition, McGraw-Hill Book Company, New York
- Kirk, D. and Jarrett, M. (1984). "Influence of Shot Peening on Fatigue and Corrosion-Fatigue Behavior of Structure Steel", Proc. of the 2nd International Conf. on Shot Peening, Vol 1, pp 133-142
- Koehler, W. (1984). "Influence of Shot Peening with Different Peening Materials on the Stress Corrosion and Corrosion Fatigue Behavior of a Welded AlZnMg-Alloy", Proc. of the 2nd International Conf. on Shot Peening, Vol 1, pp 126-132
- Lin, Y.C. and Chen, S.C. (2003). "Effect of Residual Stress on Thermal Fatigue in a Type 420 Martensitic Stainless Steel Weldment", Jour. of Materials Processing Technology, in press
- Muller, M.P., Verpoort, C. and Gessinger, G.H. (1981). "The Influence of Shot Peening on the Fatigue and Corrosion Fatigue Behavior of and Austentic-Ferritic Stainless Steel", Proc. of the 1st International Conf. on Shot Peening, Vol 1, pp 479-484
- Ras, M.H. and Pistorius, P.C. (2002), "Possible Mechanisms for the Improvement by Banadium of the Pitting Corrosion Resistance of 18% Chromium Ferritic Stainless Steel", Corrosion Science, Vol 44, pp 2479-2490 https://doi.org/10.1016/S0010-938X(02)00050-1
- SAE (1993). SAE Manual on shot-peening, SAE J 808a
- Speidel, M.O. (1981). "Effect of Shot Peening on Stress Corrosion Cracking and Corrosion Fatigue", Proc. of the 1st International Conf. on Shot Peening, Vol 1, pp 625-635
- Staehle, R.W., Forty A.J. and Rooyen, D. (1967). "Fundamental Aspects of Stress Corrosion Cracking", Proc. of Conf., The Ohio State Univ., pp 369-374
- Uhlig, H.H. and Revie, R.W. (1985). Corrosion and Corrosion Control, 3rd Edition, John Willey & Sons, New York