Abstract
$LiPO_3$ glass scintillators were fabricated, and lanthanides(except Pm) oxides or chlorides were used as an activator. For the fabrication of $LiPO_3$ glasses, optimum heating conditions were obtained, and the photoluminescence of the glasses was measured by the monochromator. For the best transparency of the glass samples, optimum heating temperature and time are $950^{\circ}C$ and 90 min, respectively. It was found that Pr, Nd, Gd, Ho, Er, Tm, Yb and Lu do not work as activator; emission spectrums of samples with them were equal to those of samples without activators. In the case of samples with Europium, the peaks of emission spectrum of $Eu^{2+}$ and $Eu^{3+}$ were 420 nm and 620 nm respectively. And samples with $Ce^{3+}$ were about 380 nm, and $Tb^{3+}$ were about 550 nm. Glass scintillators with $Be^{3+}$, $Eu^{2+}$, and $Ce^{3+}$ were found to be more applicable to neutron detection. The result of neutron detection by Ra-Be sources showed that $Ce^{3+}$ was found to be the best activator of $LiPO_3$.
$LiPO_3$에 란탄계열의 원소를 활성체로 첨가하여 '$LiPO_3$:Lanthanides' 유리 섬광체를 제작하였다. 최적의 가열 조건에서 유리 섬광체를 제작하여 광발광(photoluminescence, PL) 특성을 분석하였다. 유리 섬광체의 투명도가 최적이 되는 온도 $950^{\circ}C$, 시간 90분의 조건에서 제작하였으며, 발광스펙트럼 측정 결과 란탄계열의 원소 중 Pr, Nd, Gd, Ho, Er, Tm, Yb, Lu은 고유의 발광 스펙트럼이 형성되지 않아 활성체로서의 적용이 불가능한 것으로 나타났다. $Eu^{2+}$와 $Eu^{3+}$의 중심파장은 각각 420 nm, 620 nm이였고, $Ce^{3+}$는 약 380 nm. $Tb^{3+}$는 약 550 nm 이였다. $Bi^{3+}$, $Eu^{2+}$, $Ce^{3+}$를 첨가한 $LiPO_3$ 유리 섬광체에 광전증배관을 결합하여 섬광검출기를 구성하여. Ra-Be 중성자 선원을 이용한 중성자 검출실험을 진행한 결과 $Ce^{3+}$를 첨가한 $LiPO_3$ 유리섬광체가 가장 좋은 효율을 보여주었다.