한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제13권4호
  • /
  • Pages.304-312
  • /
  • 2002
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지

컴팩트형 수증기 개질장치 효율분석

Efficiency Analysis of Compact Type Steam Reformer

  • 발행 : 2002.12.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the performance of the $5Nm^3/hr$ compact type steam reformer which was developed for application of fuel cell or hydrogen station was evaluated in terms of gas process efficiency. For these purposes, reforming efficiency and total efficiency with system load change were analyzed. The reforming efficiency was calculated from the total molar flow of hydrogen output over total fuel flow input to the reformer and the burner on the higher heating value(HHV). In the case of the total efficiency, recovered heat at the heat recovery exchanger was considered. From the results, it was known that system performance was stable, because methane conversion showed the a slight decline which is about 2% though increasing system load to full. Reforming efficiency was increased from 20% to 58%, respectively as increasing system load from 10% to 90%. It was found that total efficiency was higher then reforming efficiency because of terms of heat recovered. As a results, it was known that total efficiency was increased form 75% to 83% at the 10% and 90% system load, respectively. From these results, it is concluded that compact steam reformer which is composed of stacking plate-type reactors is suitable to on-site hydrogen generator or to fuel cell application because of quick start within 1 hr and good performance.

키워드

참고문헌

  1. Office of Power Delivery et.al. : "A Multilayer plan for the Hydrogen R&D program," Aug, 1999
  2. M. A. Pena, J. P. Gomez and J. L. Fierro : "New catalytic route for syngas and hydrogen production," Applied Catalysts A, Vol.144, 1996, pp. 7-57 https://doi.org/10.1016/0926-860X(96)00108-1
  3. M. Lohr and I. Heil : "Compact hydrogen generation," Hydrocarbon Engineering, No. 42. 2002, pp. 79-80
  4. 노현석, 전기원, 박상언, 오영삼, 백영순, 최리상 : "수소제조기를 위한 개질촉매개 발," 한국수소에너지학회 춘계학술대회논문집, 2001, PP. 141-145
  5. 동문생, 노현석, 전기원, 박상언, 오영삼,최리상 : "담지된 니켈 촉매상에서 메탄으로부터 합성가스의 제조," 한국화학공학회 춘계학술발표 논문집, 2001, pp. 85-90
  6. 오영삼, 송택용, 백영순, 전기원, 박상언, 최리상 : "천연가스로부터 수소제조를 위한 수증기 개질촉매 특성연구," 한국가스학회 추계학술대회논문집, 2001, PP. 225-230
  7. 유중문, 노현석, 백승찬, 전기원, 박상언, 오영삼, 최리상 : "세타-알루미나 담지 니 켈 촉매상에서 메탄 부분산화 반응의 메카니즘 고찰," 한국화학공학회 추계학술대 회논문집, 2001, PP. 2541-2544
  8. 노현석, 전기원, 박상언, 조영일, 오영삼 : "세륨-지르코니아 담지 니켈촉매상에서 메탄 개질반응," 한국화학공학회 추계학술대 회논문집, 2001, pp. 2537-2540
  9. 오영삼, 송택용, 백영순, 전기원, 박상언, 최리상 : "메탄 수증기 개질장치 설계를 위한 촉매활성특성연구," 한국수소에너지 학회 추계학술대회논문집, 2001. pp. 52-60
  10. W.S. Dong, H.S. Hoh, K.W. Jun, S.E. Park and Y.S. Oh : "Methane Reforming over Ni/Ce-Zr$O_2$ Catalysts: Effect of Nickel Content," Applied Catalysis A; General Vol.226, 2002, PP. 63-72 https://doi.org/10.1016/S0926-860X(01)00883-3
  11. 노현석, 전기원, 백승찬, 오영삼, 백영순 :"Ni/Ce-Zi$O_2\;/\Theta\;-A\;l_2O_3$ 촉매상에서 메탄 개질 반응," 한국화학공학회 춘계학술대회논문집, 2002, PP. 113-117
  12. 오영삼, 송택용, 백영순, 전기원, 최리상 : "5N$m^3$/hr급 플레이트형 수소 제조장치 운전특성," 제14회 신재생에너지 워크샾 논문집, 2002, PP. 315-321
  13. 정성재 : "LNG를 이용한 On-site 수소생산 기술," 제11회 신재생에너지 워크샾 논문집, 1999, pp. 22
  14. A. Heinzel, B. Vogel, P. Hubner : "Reforming of natural gas-hydrogen generation for small scale stationary fuel cell systems", Journal of power sources, Vol.105, 2002, PP. 202-207 https://doi.org/10.1016/S0378-7753(01)00940-5
  15. 서혜경, 고준호, 임회천, 정성재 : "2kW급 MCFC용 평판형 개질기 운전결과," 한국 수소에너지학회, Vol. 13, No.2, 2002, PP. 159-167