A Case Study on the Capacity Design for Manufacturing Process of Bearing-Race

베어링궤도 제조공정의 용량설계에 관한 사례연구

  • Moon, Dug-Hee (Department of IndusTrial and Systems Engineering, Changwon National University) ;
  • Song, Cheng (Department of IndusTrial and Systems Engineering, Changwon National University)
  • 문덕희 (창원대학교 산업시스템공학과) ;
  • 송성 (창원대학교 산업시스템공학과)
  • Received : 20020800
  • Accepted : 20021000
  • Published : 2002.12.31

Abstract

In order to build a new factory, we must have answers regarding the following questions; 1. what is to be produced? 2. how are the products to be produced? 3. how much of each product will be produced? The answers are related to product-design, process-design and capacity-design respectively and they are used for layout-design as the input data. Especially capacity design decision provides the information regarding the number of equipments required and the balance of the line. This paper introduces a case study on the capacity design for a new factory where the retainers of ball bearing are manufactured. A simulation model is developed with ARENA for analyzing the system considered. The major objectives of the study are evaluating the performance of the line which is originally suggested by the company, and finding out alternatives for improving the system. Number of WIP between the processes are also investigated because it affects the space planning of the layout.

Keywords

References

  1. FAG Han-Hwa(1998), Introduction to Beating, FAG Han-Hwa, Korea
  2. Kelton, W. D., Shaclowski, R. P. and Shadowski, D.A (1998), Simulation with Arena, McGraw Hill, U.S.A.
  3. Moon, D. H., Lee, C.S.,Hwang, K. H. andShin, B. S.(1997), A Simulation Modeling fur an Engineering of a Plant Manufacturing Rubber-Pans Using SIMPLE++, Proceedings of '97 Spring Joint Conference of KORMS & KIIE, 159-162
  4. Moon, D. H. and Chang, K. K. (2000), A Simulation Model for Supporting System Design of Tire Manufacturing Cell, Journal of Komt Society for Simulation, 9(2), 27-38
  5. Tompkins, J. A, White, J. A, Bozer, Y. A. , Frazelle, E. H., Tanchoco, J. M. A. and Trevino, J. (1996), Facilities Planning (2nd Ed), John Wiley & Sons, U.S.A.