Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지

Manufacturing of Composite Solders by an In-situ Process

In-situ 공정에 의한 복합솔더 제조

  • 황성용 (한국과학기술원 재료공학과) ;
  • 이주원 (한국과학기술원 재료공학과) ;
  • 이진형 (한국과학기술원 재료공학과)
  • Published : 2002.02.20
Download PDF
⟨ Previous Next ⟩

Abstract

To improve the reliability of solder joints, a composite solder which consists of solder matrix and intermetallic reinforcements was manufactured by a new method. The cast ingot of Sn-6.9Cu-2.9Ag alloy had primary Cu6Sn5 intermetallics in the form of dendrites. After rolling the ingot, the intermetallic dendrites were crushed into fine particles and distributed uniformly throughout the solder matrix. As the rolled strips became thinner, the average size of the crushed particles reached a critical size which did not decrease any more by further rolling. The critical size was nearly the same as the average width of intermetallic dendrite trunk. The crushed intermetallic particles did not melt and remained in solid state during reflow soldering due to their high meltingterm-perature. The coarsening and gravitational segregation of the particles were observed during reflow soldering.

Keywords

References

  1. H. H. Manko: Solder and Soldering, 2nd Edition, MaGraw-Hill, New York(1979)
  2. S. K. Kang: JOM, 53 (2001), 16
  3. K. N. Subramanian, T. R. Bieler, J. P. Lucas, J. Electron.: Mater., 28(1999), 1176 https://doi.org/10.1007/s11664-999-0154-3
  4. J. L. Marshall, J. Calderon, J. S. Hwang: IEEE trans. on compon., hyb., and manu. tech., 14 (1991), 698 https://doi.org/10.1109/33.105119
  5. J. H. Lee, D. J. Park, Y. S. Kim: Scripta mater., 42 (2000), 827 https://doi.org/10.1016/S1359-6462(99)00392-9
  6. H. S. Betrabet, S. M. McGee, J. K. MaKinlay: Scripta matallurgica et materiallia, 25 (1991), 2323 https://doi.org/10.1016/0956-716X(91)90023-T
  7. M. McCormack, S. Jin, G. W. Kammlott: IEEE trans. on compon., pkg., and manu. tech.-Part A, 17 (1994), 452 https://doi.org/10.1109/95.311755
  8. H. Mavoori, S. Jin, J. Electron.: Mater., 27 (1998), 216
  9. C. T. Ho, D. D. L. Chung: J. Mater. Res., 5 (1990), 1266 https://doi.org/10.1557/JMR.1990.1266
  10. D. A. Porter, K. E. Easterling: Phase Transformation in materials, $2^{nd}$ edition, Chapman & Hall, London(1992)
  11. I. Ohnuma, M. Miyashita, K. Ishida, J. Electron.: Mater., 29 (2000), 1137 https://doi.org/10.1007/s11664-000-0004-9
  12. D. R. Poirier, G. H. Geiger: Transport phenomena in materials processing, TMS, Warrendale(1994)
  13. J. H. Lee, D. N. Lee, J. Electron.: Mater., 30 (2001), 1112 https://doi.org/10.1007/s11664-001-0137-5