참고문헌
- Keeton, L. W., Singhal, A. K. and Srikantiah, G. S., 1986, ATH0S3: A Computer Program for Thermal-Hydraulic Analysis of Steam Generator, EPRI NP-4604-CCM, Vol. 1-3
- Chan, R. K. C., Masiello, P. J. and Srikantiah, G. S., 1986, PORTHOS - A Computer Code for Solving General Three-Dimensional, Time-Dependent Two-Fluid Equations, ASME 86-WA/NE-3
- Fortino, R. T., Oberjohn, W. J., Rice, J. G. and Comelius, D. K., 1980, Thermal-Hydraulic Analyses of Once-Through Steam Generator. EPRI NP-1431
- Carlucci, L. N., 1982, Thermal Hydraulic Analysis of the Westinghouse Model 51 Steam Generator, EPRI NP-2683
- Lee, J. Y. and No, H. C., 1986, Three Dimensional Two Fluid Code for U-Tube Steam Generator Thermal Design Analysis, Proc. 2nd Int. Topical Meeting on Nuclear Power Plant Thermal Hydraulics and Operations, pp. 3-31 to 3-27. Tokyo, Japan
- Olive, J., 1982, Simulation of Three Dimensional Two-Phase Flow in a PWR Steam Generator, Proc. lOth IMACS Work Congress on System Simulation and Scientific Computation, pp. 136-139
- Lee, A. Y. and Masiello, R, J., 1988, ATH0S3 Computer Code Verification, Vol.1: 2/3 Scale Test, Vol. 2: 0.95 Scale Test, EPRI NP-5557
- Hopkins, G. W., 1988, Verification of the ATH0S3 Code Against Feeding and Preheat Steam Generator Test Data, EPRI NP-5728
- Launder, B. E. and Spalding, D. B., 1972, Lectures on Mathematical Models of Turbulence, Academic Press, London and New York
- Grimisol, E. D., 1937, 'Correlation and Utilization of New Data on Flow Resistance and Heat Transfer for Cross Flow over Tube Banks,' ASME Trans. , Vol. 59, pp. 583
- Moody, L. F., 1944, 'Friction Factors for Pipe Flow,' Trans. ASME, Vol. 66 pp. 671
- Bergelin, O. P., Colburn, A.P. , and Hull, H. L., 1950, Univ. of Delaware Eng. Expt. Station Bulletin No.2
- Jacob, M. , 1938, 'Heat Transfer and Flow Resistance in Cross Flow of Gases Over Tube Banks,' ASME, 60:381
- Thom, J. R. S. , 1964, 'Predition of Preessure Drop During Forced Circulation Boiling of Water,' Int. J. Heat Mass Transfer, Vol. 7, pp. 709
- Owens, W. L. , 1961, 'Two-Phase Pressure Gradient,' Int. Heat Transfer Conference, Part II , pp. 363-368, Univ. of Colorado
- Martinelli, R. C. and Nelson, D. B., 1948, 'Prediction of Pressure Drop During Forced Circulation Boiling of Water,' Trans. ASME 70:695
- Dittus, F. W. and Boelter, L. M. 1930, Univ. of California Publ. Eng., Vol. 2, pp. 443
- Rohsenow, W. M., 1951, 'A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids,' Trans ASME, Vol. 74, pp. 769
- Collier, J. G. and Pulling, D. J., 1962, 'Heat Transfer to Two-Phase Gas Liquid Systems, Part II : Further Data on Steam Water Mixtures,' U.K. Report AERE-R-3809
- Lellouche, G. S. and Zolotar, B. A., 1982, 'A Mechanistic Model for Predicting Two Phase Void Fraction for Water in Vertical Tubes, Channels and Rod Bundles,' EPRI NP-2246-SR
- Dingee, D. A. and Chastain, J. W., 1968, 'Heat Transfer from Parallel Rods in an Axial Flow,' ASME, Reactor Heat Transfer Conference, pp. 462
- Dwyer, 0. E., et al, 1956, 'Cross Flow of Water Through a Tube Bank at Reynolds Numbers up to a Million,' Industial and Engineehng Chemistry, Vol. 48, No. 10, pp. 1383
- Rohsenow, W. M., and Bergles, A. E., 1963, 'The Determination of Forced Convection Surface Boiling Heat Transfer,' ASME-AIChE paper 63-HT-22
- Collier, J. G., 1972, 'Convective Boiling and Condensation,' McGraw Hill Maidenhead, U. K
- Chen, J. C., 1963, 'A Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,' ASME preprint 63-HT-34
- Zuber, N., and Findly, J. A., 1965, 'Average Volumetric Concentration in Two Phase Flow Systems,' J. Heat Transfer, Vol. 87, pp. 453
- Ishii, M., 'One-Dimensinal Drift-Flux Model and Constitutive Equations for Relative Motion Between Phases in Various Two-Phase Flow Regimes,' ANL-77-47, pp. 34
- Bankoff, S. G., 1960, 'A Variable Density Single-Fluid Model for Two-Phase Flow with Particular Reference to Steam-Water Flow,' Trans. ASME Journal of Heat Transfer, Vol. 82, pp. 265
- Choi, S. K. et al., 2001, 'Thermal Hydraulic Analysis of Secondary Side of Steam Generators', KAERI Report