Abstract
Artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Microstructural analysis (mean equivalent size, number of carbides per unit area) and measurement of mechanical properties(UTS, Vickers hardness) and magnetic properties(coercivity, remanence) were performed. By comparing these results, the relationship between magnetic properties and microstructural changes with artificial aging was clarified. The carbides were classified as rod, globular and acicular type in terms of morphology. The fine acicular carbides were found to diminish drastically in the initial stage of aging. The magnetic coercivity and remanence were observed to decrease rapidly in the initial about 920 hours of aging time and then decrease slowly afterwards. Linear correlations between the mechanical properties and magnetic properties such as correlations remanence were found.
2.25Cr-1M 강이 $540^{\circ}C$에서 장시간 노출되었을 때 일어나는 미세조직 변화를 모사하기 위해 인공 열화를 실시하였으며 이에 대해 미세조직(탄환화물의 평균등가크기 및 단위면 개수), 기계적 성질 (인장강도 및 경도), 자기적 성질(보자력 및 잔류자화)을 측정하였다. 이들 결과를 비교함으로써 열화에 따른 자기적 성질의 변화와 미세조직 사이의 상관관계률 규명하였다. 탄화물을 그 형장에 따라 막대상, 구상, 침상으로 분류하였으며 침상의 탄화물은 열화 초반부에 급격히 소멸되는 경향을 보였다. 또한 보자력과 잔류자화는 열화 초반부에 급격히 감소한 후 점차 완만히 감소하는 경향을 보였다. 기계적 성질과 보자력 및 잔류자화 사이에는 선형적 상관관계가 존재하였다.