초록
증류수 및 수도수 중에서 방열기로 사용되는 알루미늄합금재의 온도 변화, 탈기에 의한 개로전위, 부식전류밀도에 관하여 연구한 결과 다음과 같은 결론을 얻었다. 1. 청수 중에서 개로전위는 온도가 높아짐에 따라 비전위화 되고, 또한 탈기 후의 개로전위는 탈기 전의 개로전위보다 비전위화 된다. 2. 증류수 중에서의 부식전류밀도는 수도수 중에서의 부식전류밀도보다 더 억제된다. 3. 탈기 후의 부식전류밀도는 탈기 전의 부식전류밀도보다 크게 억제된다
Most of all the mechanical devices are becoming more high-speed and high-power as well as their used condition being more pollution with rapid development in industrial part. So, it is necessary for these devices to equip cooling system to overcome that kind of severe using condition. Industrial development and income increase causes rapid increase in using fossilenergy and it results in accelerating environmental pollution owing to the increasement in emission of air pollution substance. Specially, fresh water like stream and river water is acidified. Therefore, corrosion damage is accelerated in radiator for automobile that is using acidified water. So, in this study, corrosion test was carried out in distilled and tap water for the investigation on the corrosion behavior of Al-alloy that is using as material for radiator of automobile The main results obtained are as follows According to increase of temperature, open circuit potential is decreased in fresh water. And open circuit potential after deaeration is lower than that before deaeration. Corrosion current density in distilled water is less drained than that of tap water. And Corrosion current density after deaeration is less drained than that before deaeration.