대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권6호
  • /
  • Pages.1159-1168
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

SEM을 이용한 나일론피니언의 마멸특성 고찰

Investigation about the Wear Characteristics of Nylon Pinions Against Steel Gears by SEM

  • 김충현 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 안효석 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 정태형 (한양대학교 기계공학부)
  • 발행 : 2002.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Power-transmission Nylon pinions against steel gears fur different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition by SEM(Scanning Electron Microscope). The wear characteristics of Nylon pinions varied significantly with the pitch line velocity and applied load. Wear occurred most severely at the regions including pitch circle and root circle of Nylon pinions. It is confirmed that Nylon pinions are able to be used fer power-transmission under limited conditions.

키워드

참고문헌

  1. 이기만, 정동천, 1992, '플라스틱 해설과 물성집,' 한국플라스틱기술정보
  2. 한영수, 현동훈, 박원규, 정태형, 1999, '성형 플라스틱 기어 핸드북,' 일진사
  3. 김충현, 안효석, 정태형, 2000, '나일론과 풀리아세탈의 왕복동마찰마멸특성에 관한 고찰,' 대한기계학회논문집 A권, 제24권 제3호, pp. 786-793
  4. 김충현, 이성철, 안효석, 정태형, 2000, '아세탈과 나일론피미언의 마찰 및 운전특성에 관한 고찰,' 대한기계학회논문집 A권, 제24권 제9호, pp. 2387-2396
  5. J. H. Chen, F. M. Juarbe, and M. A. Hanley, 1981, 'Factors affecting fatigue strength of Nylon gears,' J of Mechnical design - Transaction of the ASME, Vol. 103, pp. 543-548 https://doi.org/10.1115/1.3254951
  6. Tsukamoto, N., 1979, 'Investigation about the Strength of Plastic Gears (I st. The Strength of Nylon Gears which have Counter-corwing),' Bulletin of the JSME, Vol. 22, No. 173, pp. 1685-1692 https://doi.org/10.1299/jsme1958.22.1685
  7. Tsukamoto, N., 1981, 'Investigation about the Strength of Plastic Gears (2nd report ; Abrasion of the Nylon Gear for Power Transmission, Meshing with the Steel Gear),' Bulletin of the JSME, Vol. 24, No. 191, pp. 872-881 https://doi.org/10.1299/jsme1958.24.872
  8. Terashima, K., Tsukamoto, N., and Nishida, N., 1986, 'Development of Plastic Gears for Power Transmission (Abnormal Wear near Tooth Root and Tooth Fracture near Pitch Point),' Bulletin of the JSME, Vol. 29, No. 251, pp. 1598-1604 https://doi.org/10.1299/jsme1958.29.1598
  9. Tsukamoto, N., Yano, T., and Sakai, H., 1982, 'Noise and Transmission Efficiency under Deformation of Tooth Form of Nylon Gears,' Bulletin of the JSME, Vol. 25, No. 207, pp. 1465-1473 https://doi.org/10.1299/jsme1958.25.1465
  10. Shoji, A., Nogami,M., and Satho, I., 1996, 'Studies on the strength of Injection Molded Plastic Gears,' DE-Vol. 88, Power Ttransmission and Gearing Conference, ASME 1996, pp. 739-744
  11. 안태완, 이동호, 박이순, 이상원, 정한모, 1987, '고분자물성,' 대광문화사
  12. Theberge, J. E., Arkles, B., and Cloud, P .. 1974, 'How Plastics Wear against Plastics,' Machine design, Oct. 31, pp. 60-61