참고문헌
- Noie, S. H., Kalaei, M. H., Sanati, R. and Mohammad-Taheri, M., 2002, Thermal Characteristics of a Two-phase Closed Thermosyphon, 12th IHPC, Vol. 2, D-5
- Liu, G., 1992, The Application of Heat Pipe Heat Exchanger in Exhaust Gas Heat Recovery System and its Thermodynamic Analysis, 8th Int. Heat Pipe Conference, Beijing, China, pp. 582-585
- Gaugler, R. S., Heat Transfer Device, US Patent No. 2350348, US Patent Application Dec. 21, 1942
- Volodymyr, B., Volodymyr, K, Aleksandr, N. and Vladilen, Z., 2002, Study of Structural and Mechanical Properties of Metal Felt Wicks Intended for High Temperature Heat Pipes-Solar Receivers, 12th IHPC, Vol. 2, J-4
- Peterson, G. P. and Ma, H. B., 1996, Experimental investigation of the maximum heat transport in triangular groove, ASME J of Heat Transfer, Vol. 35, No. 3, pp.740-746
- Park, R.J., 1992, Two-phase closed thermosyphon with two-fluid mixtures, Department of Mechanical Engineering, University of Ottawa, Ottawa, Ontario, Canada, M. S. Thesis
- Chen, M. M., 1987, Heat Transfer Performance of Two-Phase Closed Thermosyphons with Different lengths, 6th IHPC, Grenoble, pp. 647-651
- Botemps, A., Goubier, C., Marquet, C., Solecki, J. C. and Nardi, C., 1987, Performance Limits of a Toluene Loaded Closed Twophase Thermosyphon, 6th IHPC, Grenoble, pp. 634-644
- Fledman, Jr. K T. and Srinivasan, R., 1984, Investigation of Heat Transfer Limits in Two-phase Closed Thermosyphon, 5th IHPC, Tsukuba, pp. 30-35
- lmura, H. and Kusuda, H., Ogata, J. I., Miyaz, T. and Sakamoto, N., 1977, Heat Transfer in Two-Phase Closed-Type Thermosyphons, Trans. of Japan Soc. of Mech. Engrs., pp. 485-493
- Cohen, H. and Bayley, F. J., 1955, Heat Transfer Problem of Liquid Cooled Gas Turbine Blades, Proc. Inst. Mech. Eng., 169-20, pp. 1063-1080
- Lee, Y. and Mital, U, 1972, Int. J. of Heat and Mass Transfer, 15-9, pp. 1695-1707
- Tu, C., Xie, G., Hu, C., Gao, Z. and Hong, R., 1984, The Two Phase Closed Thermosyphon:an Experimental Study with Flow Pattern and Optimum Fill Charge, China-US. Seminar on Two-flows and Heat Transfer, Sian, pp. 395-405
- Hahne, E. and Gross, U, 1981, The Influence of the Inclination Angle on the Performance of a Closed Two-Phase Thermosyphon, 4th IHPC, London, pp. 125-135
- Negishi, K. and Sawards, T., 1983, Heat Transfer Performance of an Inclined Two-Phase Closed Thermosyphon, Int. J. of Heat and Mass Transfer, Vol. 26, No. 8, pp.1207-1213
- Nitipong, 2000, A performance limit model of an inclined two-phase closed thermosyphon, Proceedings of 6th IHPS, Chiang Mia
- Noie, S. H. and Ayani, M. B., 2000, Effect of Aspect Ratio and Filling Ratio on Heat Transfer Characterisstics of A two-phase closed Thermosyphon, Proceedings of 6th IHPS, Chiang Mia
- Clement, B. and Lee, Y., 1981, Additional Parameters in Two-Phase Closed Thermosyphon: Effects of Tube Diameter and Wall Thickness, Int. J. of Heat and Mass Transfer, Vol. 24, No. 9, pp, 1554-1555
- Peterson, G. P. and Ma, H. B., 1996, Experimental Investigation of the Maximum Heat Transport in Triangular Groove, ASME J. of Heat Transfer
- Kline, S. J. and McClintock, F. A., 1953, Describing Uncertainties in Single-Sample Experiments, Mechanical Engineering, Vol. 75, pp.3-8
- Nusselt, W., 1916, Die Oberflachenkondensation des Wasserdampfes, Z. Ver, Deut. Ing., 60
- Semena, M. G. and Kiselev, Yu. F., 1978, Investigation of Heat Transfer in Condensation of Two-Phase Thermosyphons, In: Teploobmen v energeticheskikh ustanovkakh (Heat Transfer in Power Plants), Naukova Dumka Publishing House, Kiev, 68-74