한국섬유공학회지 (Textile Science and Engineering)

  • 제39권5호
  • /
  • Pages.553-562
  • /
  • 2002
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지

고속방사 PBT섬유의 열처리 조건에 따른 미세구조 형성과 물성

The Effect of Annealing Conditions on the Eine Structural Change and Physical Properties of PBT Fibers Obtained by High-speed Melt Spinning

  • 이선희 (부산대학교 섬유공학과) ;
  • 조현혹 (부산대학교 섬유공학과)
  • 발행 : 2002.10.01
⟨ 이전 논문 다음 논문 ⟩

초록

Poly(butylene terephthalate) fibers were prepared by high speed melt spinning in the range of 4~8 km/min and annealed under various conditions. The efforts of annealing temperature and tension on the fine structure and properties of PBT fibers were investigated using density, birefringence, WAXD, TMA, tensile test, etc. In the case of PBT fiber annealed under taut conditon, the results of WAXD profiles indicated that (100) plane was inclined relative to the fiber axis, and we confirmed that the reflection peak varied with the inclination of the fiber axis from 2$^{\circ}$ to 8$^{\circ}$ In the TMA results of PBT fibers annealed at various temperatures, shrinkage tendency suggested that crystallization prevailed over chain re-coiling. In the s-s curves results, the elongation of the PBT fibers annealed below 10$0^{\circ}C$ is increased and the specific stress is similar. Especially, in the case of PBT fiber spun at 4 km/min, higher annealing temperatures resulted in an increased work of rupture.

키워드

참고문헌

  1. J. Polym. Sci. Polym. Phys. v.13 Crystal Deformation in Aromatic Polyester R. Jakeways;I. M. Ward;M. A. Wilding;I. H. Hall;I. J. Desborough;M. G. Pass
  2. J. Polym. Soc. Polym. Lett. Ed. v.14 Reversible Crystal Deformation and Conformational Changes in Poly(tetramethylene terephthalate) R. Jakeways;T. Smith;I. M. Ward;M. A. Wilding
  3. Macromolecules v.13 Solid-State Transition of Poly(butylene terephthalate) Induced by Mechanical Deformation K. Tashiro;Y. Nakai;M. Kobayashi;H. Tadokoro
  4. J. Appl. Polym. Sci. v.31 Influence of Processing Conditions on Structure Development and Mechanical Properties of Poly(butylene terephthalate)Filament F. M. Lu;J. E. Spruiell
  5. J. Appl. Polym. Sci. v.34 On-Line Studies of Structure Development during Melt Spinning of Poly(butylene terephtahtalate) S. Chen;W. Yu;J. E. Spruiell
  6. J. Polym. Sci. Part B, Polym. Phys. v.35 Tensile Drawing, Morphology, and Mechanical Properties of Poly(butylene terephthalate) P. L. Carr;R. Jakeways;J. L. Klein;I. M. Ward
  7. J. Polym. Sci.: Part B.: Polym. Phys. v.24 Kinetics of Fiber Heat Treatment III Poly(butylene terephthalate) Fibers P. N. Peszkin;J. M. Schultz
  8. J. Korean. Fiber. Soc. v.26 The Effect of Annealing on the Crystal Morphology of PBT and Its Aminolysis Behavior Y. K. Kim;K. J. Kim
  9. J. Korean. Fiber. Soc. v.38 Fine Structure Formation and Properties with Drawing of Poly(butylene terephthalate) Films(I) -Effect of Drawn and Heat Setting Temperature- S. H. Lee;H. H. Cho
  10. J. Korean. Fiber. Soc. v.39 Fine Structure Formation and Properties with Drawing of Poly(butylene terephthalate) Films(II) -Effect of High Temperature and High Speed Drawing- S. H. Lee;H. H. Cho
  11. Proceedings of '01 Kyushu-Seibu/Pusan-Kyeongnam Joint Symposium on High Poymers(10th) and Fibers(8th) Fine Structure Formation and Physical Properties of Poly(butylene terephthalate) Fibers in High-Speed Melt Spinning S. H. Lee;H. H. Cho
  12. Proceedings of the Korean Textile Conference v.34 no.2 Fine Structure Formation and Properties with Take-up Velocities and Solvent Treatment Conditions of Poly(butylene terephthalate) Fibers S. H. Lee;H. H. Cho
  13. J. Appl. Polym. Sci. v.45 Structure Formation in Stretched Sheets of Poly(butylene terephthalate) A. Kaito;K. Nakayama;Zubaidi
  14. J. Polym. Sci.:Polym. Phys. Ed. v.14 Quantitative Information from X-ray Diffraction of Nylon 6 Yarns(I)-Development of a Model for the Analytical Description of Equatorial X-ray Profiles H. M. Heuvel;R. Huisman;K. C. J. B. Lind
  15. J. Polym. Sci.: Polym. Phys. Ed. v.14 Quantitative Information from X-ray Diffraction of Nylon 6 Yarns(II)-Physical Aspects of Some Quantitative Parameters R. Huisman;H. M. Heuvel
  16. X-ray Diffraction Methods in Polymer Science L. E. Alexander
  17. Thermal Characterization of Polymeric Materials M. Jafe;J. D. Menczel;A. Turi(Ed.);2nd Ed.