Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Microstructure of W-Cu Composite Powders with Variation of Milling Method during Mechanochemical Process

기계화학적 공정의 밀링 방법에 따른 W-Cu 복합분말의 미세조직

  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the fabrication process of the W-Cu nanocomposite powders has been studied to improve the sinterability through the mechanical alloying and reduction of W and Cu oxide mixtures. In this study. the W-Cu composites were produced by mechanochemical process (MCP) using $WO_3-CuO$ mixtures with two different milling types of low and high energy, respectively. These ball-milled mixtures were reduced in $H_2$ atmosphere. The ball-milled and reduced powders were analyzed through XRD, SEM and TEM. The fine W-Cu powder could be obtained by the high energy ball-milling (HM) compared with the large Cu-cored structure powder by the low energy ball-milling (LM). After the HM for 20h, the W grain size of the reduced W-Cu powder was about 20-30 nm.

Keywords

References

  1. Int. J. of Powder Metall. v.30 R. M. German;K. F. Hens;J. L. Johnson
  2. Treatise on Powder Metall. v.2 C. G. Goetzel
  3. Material Letters v.51 Y. D. Kim;N. L. Oh;S. T. Oh;I. H. Moon https://doi.org/10.1016/S0167-577X(01)00330-5
  4. High Temperature High Pressure v.21 W. Neumann;E. Kny
  5. Int. J. of Powder Metall. v.33 Bin Yang;R. M. German
  6. Acta Metall. v.23 W. J. Huppmann;H. Riegger https://doi.org/10.1016/0001-6160(75)90010-3
  7. Powder Metall. v.19 A. K. Bhalla;J. D.Williams https://doi.org/10.1179/pom.1976.19.1.31
  8. Tungsten and Tungsten Alloys J. Whittenauer;N. G. Nieh;A. Crowson(ed.);E. S. Chen(ed.)
  9. Int. J. of Powder Metall. v.30 J. L. Johnson;R. M. German
  10. Powder Metall. v.22 I. H. Moon;J. S. Lee https://doi.org/10.1179/pom.1979.22.1.5
  11. Powder Metall. v.37 T. H. Ihn;S. W. Lee;S. K. Joo https://doi.org/10.1179/pom.1994.37.4.283
  12. Mater. Sci. Eng. v.A117 R. Birringer
  13. Modern developments in P/M v.19 F. R. Sale;J. N. Albiston
  14. J. of Mat. Sci. v.9 A. K. Basu;F. R. Sale
  15. Powder Metall. v.28 P. Walkden;J. N. Albiston;F. R. Sale https://doi.org/10.1179/pom.1985.28.1.36
  16. J. of Ceramic Processing Research v.3 W. S. Shim;D. G. Kim;T. Sekino;J. W. Noh;Y. D. Kim;I. H. Moon
  17. Int. J. of Powder Metall. And Powder Tech. v.1 K. V. Sebastian;G. S. Tendolkar
  18. Poroshk. Metall. v.6 V. V. Panichkina;M. M. Sirotyuk;V. V. Skorokhod
  19. Poroshk. Metall. v.9 V. V. Skorokhod;Yu. M. Solonin;N. I. Filippov;A. N. Roshchin
  20. J. Refrect. Met. Hard Mater. v.4 W. D. Schubert
  21. 충남대학교 박사학위논문 이성

Cited by

  1. Grinding Behaviour of Aluminum Powder for Al/CNTs Nano Composites Fabrication by Dry Grinding Process Using a High Speed Planetary Ball Mill vol.23, pp.2, 2013, https://doi.org/10.3740/MRSK.2013.23.2.89