참고문헌
-
Standard specifications for highway bridge(
$6^{th}$ ed.) AASHTO - Report of Florida Dept. of Trans. Development of In-situ equipment for capacity determinations of deep foundations in Florida limestone Bloomquist, D.;Townsend, F.C.
- Canadian Foundation Engineering manual Canadian Geotechnical Society
- Analysis and design of drilled shaft foundations socketed into rock Carter, J.;Kulhawy, F.
- Report to Electric Power Res. Inst. Palo Alto, in prep. Case history evaluation of the behaviour of drilled shafts under axial and lateral loading Chan, Y.-J.;Kulhawy, F.H.
- Proc. Of The KGS Spring Conference 2002 Comparison of rock socketed pile design methods for shaft resistance Cho, C.W.;Lee, M.W.;Cho, Y.H.;Yoo, H.K.;Park, Y.S.
- Rock socketed piles: MMBW Highways Division Practice. Symp. on Rock Socketed Piles. Aust. Geomech. Soc. Vic. Group. Day, H.B.
- Rock mechanics in engineering practice Geological considerations. Deere, D.U.;Stagg, K.G.(ed.);Zienkiewicz, O.C.(ed.)
- Foundation and earth structures (Design Maunal 7.2) NAVFAC
- Drilled shaft FHWA;US DoT
- Pile design and construction GEO
- 5th Intl. Conf. and Exhibition of Piling and Deep Foundation Improving the capacity of piles in rock through the use of expansive cement additives Haberfield, C.M.;Baycan, S.;Seidel, J.P.
- General Report Proc. British Geotechnical Society Conf. on Settlement of Structures Settlement of foundations on rock Hobbs, N.B.
- Int. Jnl. Rock Mech. Min. Sci. & Geomech. Abstr. v.27 no.3 Estimating Mohr-Coulomb friction and cohesion values from the Hoek-Brown failure criterion Hoek, E. https://doi.org/10.1016/0148-9062(90)94333-O
- Jnl. Geotech. Engg. Div. ASCE v.106 Empirical strength criterion for rock masses Hoek, E.;Brown, E.T.
- Shaft resistance of rock-socketed drilled piers Horvath, R.G.;Kenney, T.C.
- Can. Geot. Jnl. v.20 Methods for Improving the Performance of Drilled Piers in Weak Rock Horvath, R.G.;Kenney, T.C.;Kozicki, P. https://doi.org/10.1139/t83-081
- PhD Thesis, Seoul Nat. University Analysis of Vertical and Horizontal Resistance Behavior of Cast in situ Concrete Piles in Completely Weathered Granite Gneiss Jeon, K.S.
-
G
$\'{e}$ otechnique v.37 no.1 Constant normal stiffness direct shear testing for socketed pile design in weak rock Johnston, I.W.;Lam, T.S.K.;Williams, A.F. - Intl. Symp. on Hard Soils - Soft Rocks. Cyclic Constant Normal Stiffness Direct Shear Testing of Soft Rock Johnston, I.W.;Seidel, J.P.;Haberfield, C.M.
- Proc. 6th ANZ Conf. on Geomechanics Analytical predictions for side resistance of piles in rock Kodikara. J.K.;Johnston, I.W.;Haberfield, C.M.
- Design Code of Rail Road Korea Rail Road Office
- Design Code of Bridge Foundation Korea Society of Civil Engineers
- Foundation Engineering Design Manual Korean Geotechnical Society
- Proc. on Conf. on design and performance of deep foundation: piles and piers in soil and soft rock no.38 Drilled shaft side resistance in clay soil to rock. Kulhawy, F.H.;Phoon, K.K.
- Hong Kong Engineer Side resistance of a rock-socketed caisson Lam, T.S.K.;Yau, J.H.W.;Premchitt, J.
- Jnl. Geotech. Eng. (ASCE) v.118 no.10 Design of socketed drilled shafts in limestone McVay, M.C.;Townsend, F.C.;Williams, R.C. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:10(1626)
- Aust. Geomech. Jnl. v.98 Design Loadings for Foundations on Shale and Sandstone in the Sydney Region Pells, P.J.N.;Douglas, D.J.;Rodway, B.;Thorne, C.;McMahon, B.K.
- Intl. Conf. on Structural Foundations on Rock An Experimental Inverstigation into Side Shear for Socketed Piles in Sandstone Pells, P.J.N.;Rowe, R.K.;Turner, R.M.
- Interim research report (unpubliched) A new improved design method for drilled shaft in rock Piletech Co.;Hanyang Univ.
- Report GEOT-11-84 The design of piles socketed into weak rock Rowe, R.K.;Armitage, H.H.
- PhD. Dissertation, Monash University The analysis and design of pile shafts in weak rock Seidel, J.P.
- Rocket for Windows v2.0 Users Manual Seidel, J.P.
- US FHWA Intl. Conf. on Design and Construction of Deep Foundations A New Approach for the Prediction of Drilled Pier Performance in Rock Seidel, J.P.;Haberfield, C.M.
- Int. Jnl. Rock Mech. and Rock Engg Towards an understanding of joint roughness Seidel, J.P.;Haberfield, C.M.
- Concrete technology and practice. (1st ed.) Taylor, W.H.
- Geomechanics Soc., Inst. Engnrs. Aust. The allowable loadings of foundations on shale and Sandstone in the Sydney Region. Part 3. Field Test Results. Paper presented to Sydney Group of Aust. Thorne, C.P.
- PhD Dissertation, Monash University The design and performance of piles socketed into weak rock Williams, A.F.
- Proc. 3rd ANZ Conf. on Geomechanics v.1 The design and performance of cast-in-situ piles in extensively jointed Silurian mudstone Williams, A.F.;Ervin, M.C.
- Can. Geotech. Jnl. v.18 Side resistance rock sockets in sandstone, mudstone and shale Williams, A.F.;Pells, P.J.N. https://doi.org/10.1139/t81-061
- Intl. Conf. on Structural Foundations on Rock The design of socketed piles in weak rock Williams, A.F.;Johnston, I.W.;Donald, I.B.