대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권11호
  • /
  • Pages.2429-2435
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

스트립 다운에 의한 엔진 마찰 시험의 문제점

The Problem of Engine Friction Test by Strip Down Method

  • 조명래 (현대자동차 파워트레인연구소) ;
  • 오대윤 (현대자동차 파워트레인연구소) ;
  • 한동철 (서울대학교 기계항공공학부)
  • 발행 : 2002.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this paper is to investigate the problem of strip down method, which is usually used to evaluate the engine friction level. The validity of strip down method was investigated by theoretical analysis of friction in crank and piston assembly. The friction of cylinder and piston assembly was analyzed under the various test conditions. The measured cylinder pressure was used as boundary conditions of friction torque and loss calculation. The friction loss of crank and piston assembly was influenced by test conditions that resulted from the variation of load condition. From the results, we have known that the strip down method could be possible to distort the friction loss of engine moving components.

키워드

참고문헌

  1. Furuhama, S. and Takiguchi, M., 1979, 'Measurement of Piston Frictional force in Actual Operating Diesel Engine,' SAE paper, No. 790-855
  2. Wakuri, Y., Kitahara, T., Hamatake, T., Soejima, M. and Oono, 0., 1996, 'Characteristics of Piston Ring Friction (Influences of Piston Ring Specifications),' J. of JSME, 62(599), pp. 2811-2817 https://doi.org/10.1299/kikaic.62.2811
  3. Ha, K. P., 2001, 'Development of Piston Friction Test Rig,' Hyundai Motors TR ADH20011103000001
  4. Ogita, Y., Niwa, K. and Tanaka, T., 1988, 'Measurement of Bearing Friction Loss Under Dynamic Load', SAE880547
  5. Han, D. C. and Cho, M. R., 1998, 'Friction Characteristics of Direct Acting Type OHC Valve Train System,' J of KSTLE, Vol. 14, No.1, pp. 23-27
  6. Pieprzak, J. M., Willermet, P. A. and Klassen, D., 1989, 'A Tappet Rotation Monitor Based on Light Reflectance - Development and Functional Testing,' SAE 890722
  7. Hoshi, M, 1984, 'Reducing friction losses in automobile engines', Tribology International
  8. Kovach, J. T., and Tsakiris, E. A., Wang, L. T., 1982, 'Engine Friction Reduction for Improved Fuel Economy', SAE820085
  9. Kim, J. S., 2001, 'The Final Report for the Engine Friction Test Method,' Hyundai Motors TR ADH2001050200002
  10. Cho, M. R. and Lee, K. J.,2001, 'Measurement of Engine Main Bearing Loads,' Hyundai Motors TR ADH2001111400010
  11. Cho, M. R., Han, D. C. and Choi, J. K., 1999, 'Oil Film Thickness in Engine Connecting-Rod Bearing with Consideration of Thermal Effects: Comparison between Theory and Experiment,' ASME J. of Tribology, Vol. 121, pp. 901-907 https://doi.org/10.1115/1.2834153
  12. Cho, M. R., Choi, J. K. and Han, D. C., 2001, 'Calculation of Mixed Lubrication at Piston Ring and Cylinder Liner Interface,' KSME International Journal, Vol. 15, No.7, pp. 859-865
  13. Kim, J. Y., Han, D. C., Cho, M. R. and Choi, J. K., 2001, 'The Study on the Dynamics and Friction Characteristics of Piston Skirt with Consideration of Mixed Lubrication,' KSME International Journal, Vol. 15, No.6, pp.735-742